2M FC To FC Optic Patch Cord

High Return Loss LZSH Jacket Duplex 2M Fiber Optic Patch Cables FC To FC

1. Basic Introduction:

FC/UPC-FC/UPC Multimode Patch Cord has 100% Insertion, Return Loss, End Face, and Interference Inspection.

The fiber connectors at both ends contain fiber-optic connection lines are fiber optic patch cords, and the heads at both ends of the fiber optic patch cord can be the same or different, which makes the fiber optic cord variety varied. But the mode of the header needs to be the same, such as single-mode to Singlemode, multimode to multimode.

FC fiber patch cables are widely used in the optical path, with metalheads and ceramic ferrule. They have good stability and higher pluggable times than plastic heads. 0.9/1.8/2.0/2.8/3.0mm cable diameter can be selected.

2. Patch Cord Benefit & Features:

• Free FC/UPC fiber optic patch cable sample
• Low insertion loss & back reflection
• One-piece construction & pull-proof design
• Insertion loss ≦0.25 dB,Insertion times≧1000
• Precision anti-rotation key and corrosion resistant body
• RoHS-rated plastic housing and boots in a variety of colors
• Each cable assembly is manually tested and verified
• each cable assembly is individually sealed and labeled

3. Fiber Optic Patch Cord Applications:

• Telecommunications
• CATV, LAN, MAN, WAN, Test &Measurement
• Military industry
• Medical

4. Specification&Technology Parameter

* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.

* The default connector key is aligned to the slow axis.

5. LC to FC Connector Specification& Technology Parameter​:

* EX: OFC-D-LA-LA-09-0-1.0

6. FC Connector Ordering Information:

* EX: OFC-S-FA-FC-09-1-0.5

7. Polish Type Abbreviations:

Note: The polish type affects the amount of back reflection, also known as reflectance.

PC - Physical Contact. Polished to create a slight dome at the end of the ferrule that helps to maximize the signal being transmitted.

UPC - Ultra Physical Contact. More extensive polishing than the PC type, a greater dome shape is created that further helps to maximize the signal being transmitted.

APC - Angled Physical Contact. Polished at an angle rather than a dome shape. This is the most efficient polish type.

Who is Geehe Comm?

Geehe Comm was founded in 2006, and we have been in the Passive Optics field for more than 15 years.

We have previously focused on domestic trade OEM service for Brands in China and eventually achieved the industry's Top ten annual sales of more than 500 million.

Also OEM service for American and European brands from the 2016 year.

We have seen that today there are also many factories and wholesalers internationally. However, their level of craftsmanship and testing are still stuck in a few years ago.

In fact, the production equipment of testings has been upgraded in recent years, and Geehe Comm hopes our advanced technology can inject fresh blood into this market.

Consumers deserve a better Fiber patch cord.