8664 Fast curing double component Industrial Adhesive Glue / fiberglass adhesive glue

8664 Fast curing double component adhesive Used in metal, ceramic, cement, wood, ABS, PU, glass and Fiber glass

Product specificationTechnical Data Sheet

8664 Fast curing double component adhesive

8664

Curing fast, high bond strength, strength rises rapidly; environmental friendly, water resistance, low temperature resistance

No mildew, non-toxic, non-corrosive, excellent impact resistance and durability. Use to replace the

greatSmells, not environmentally friendly two-component acrylic adhesive.

Typical usage

Used in metal, ceramic, cement, wood, ABS, PU, glass and

Fiber glass and other materials, or mutual self-stick.

Characteristics before curing

Typical value range

Appearance

A component Gray to pale yellow paste

B component Light brown liquid

Base material chemical composition

A component polyhydric alcohols

B component Isocyanate

viscosity(mPa.s)

(GB/T2794-1995) Brookfield RVF

A component

(6# rotor50rpm): 9000 9000±3000mPa.s

B component

(3# rotor20rpm): 2000 2000±1000 mPa.s

density(g/cm3)

(GB/T13354-1992) 1.3 A component:1.3±0.1g/cm3

1.2 B component:1.2±0.1g/cm3

pot life(min) >4

surface drying time(23±2℃) 6 4～10 min

After curing characteristics

Shear strength (Mpa)

23±2℃solidifytime 2h

(Al/Al) 7.0 ≥5

23±2℃solidify time7 days

(Al/Al) 11.5 ≥10

Working temperature(℃) -40-90

Instructions

·Clean the surface to be bonded to be clean, dry；

·With glue visua

A:B

volume ratio1:1,Rapid mixing,A:B = 1:1 (V/V)

Accurate calibration scale= 1.1:1(W/W)；

·Sizingtrial period is completed, the contact pressure is applied

·Room temperature curing or heat curing Curing

Attention:

·sizing ambient temperature 0 ~ 35 ℃, humidity <70%; unused glue should be closed immediately

store seal to prevent moisture absorption; highly contaminated glue cannot reload into the original packaging bucket

·keep away from children

·This product contains isocyanates substances which has the irritationon the skin andeyes. Recommended for use in a well-ventilated place

·In case of contact with eyes and skin, immediately rinse with water

·Product safety information, please refer to the product MSDS

packing specification

400ml/set, double-tubes

Storage conditions

Store in a cool dry place 8-28 ℃

Storage period: 12 months

special version

The data in this manual were obtained under laboratory conditions, the use of environmental differences, the user data and make reference to these

Conditions for analysis and testing.Huitian does not guarantee sales of our productsand use of the product and the specific conditions problem with the product.

We are not liable for any direct, indirect or incidental damages. Users in the course of any problems, you can return to Huitiantechnology and Service department, we will provide you with all the help.

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude