Medical Material Tester ANSI/AAMI-EC53 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

ANSI/AAMI-EC53: 2013/(R)2020 Flex Life Of Trunk Cable And Patient Leadwire Flex Relief

Standard & Clauses:

AAMI-EC53-1998

ANSI/AAMI-EC53:2013/(R)2020 “ECG trunk cables and patient leadwires”

Specimen Range, Application, Principle, Structure and Use Environment:

Samples and Restrictions: EGA trunk cables and patient leadwires

Application: Used to test the bending resistance of EGA trunk cables and patient leadwires when the power cord enters the appliance. To verify its reliable performance.

Principle: Use a motor to drive the fixture to flex the sample. Apply current to the soft wire to make the sample flex left and right at a certain speed and angle of ±90°. And clamp the weight at a position 6 inches away from the lead outlet end of the sample. The test will automatically stop when the equipment reaches the test times or the soft wire is short-circuited.

Equipment structure and schematic diagram:

The equipment is driven by a servo motor, and the fixture is installed in the center. And the eccentricity is adjustable. When clamping the sample, the flexing axis and the point where the cord enters the appliance can coincide as much as possible. This results in minimal lateral displacement of the cord and load.

Equipment dimensions: approximately: 800×800×1300 (mm) W×H×D, equipment weight: 130kg

Technical Parameters:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.