100kw m2 flame test apparatus

Brand Name:YUYANG

Model Number:YYF056

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual ...

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Flame Test Apparatus For Fire Resistance Test Instrument of Plastic material IEC60695-11-5 Needle Flame Test Apparatus For Electronic components Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It

Brand Name:YUYANG

Model Number:YYF017

Place of Origin:China

UL790 UL1730 Solar Cell & Roofing Spread of Flame Test Apparatus Description: This equipment is designed according toUL 1730, IEC 61730-2:2016 Annex. A. Down in a simulated real conditions to assess the fire ...

Brand Name:PEGO

Model Number:PG-NF

Place of Origin:China

...Flame Test Apparatus Electrical Safety Test Equipment 1. Introduction of Needle Flame Test Apparatus: ZY-2 Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Flame Test Apparatus Cables and Wires Flame Resistance Test Product information: This flammability test chamber meets the requirements of UL1581 and UL94 flame test. The effects of flames in the early stages of fire on electrical and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame test...

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,

Brand Name:Kinte

Model Number:WH-8903A (ZY-1)

Place of Origin:Guangdong,China (Mainland)

..., etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques.

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After ...

Brand Name:KINGPO

220V 50Hz Ф0.9mm Needle Flame Test Apparatus Flowmeter Adjustment Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45...

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle Flame Test Apparatus by IEC60695-11-5 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, ...

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Feature: The

Place of Origin:China

Brand Name:KeRang

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance,

Brand Name:Delta

Model Number:HTI

Place of Origin:China

...Flame Test Apparatus​ Introduction: A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2ºC when testing...

Brand Name:GC

Model Number:GC-UL94

Place of Origin:China

Laboratory UL94 Horizontal And Vertical Flame Resistance Tester For Plastic Product Introduction: The UL94 horizontal vertical flame chamber machine is a testing equipment used to evaluate the flammability of materials used in electrical and electronic ...

Brand Name:HTI

Model Number:HTB-066B

Place of Origin:Guangdong,China(Mainland)

...-resistant materials :wall and top material of Camping tentage Standard:CPAI-84:1995 clause 6 Flammability Test Method, Wall and Top Material Specification: Specimen size Wall and top material:90mm×300mm (±3mm) Burning Flame height 38±2mm(adjustable)

Brand Name:DAXIAN

Model Number:DX8657

Place of Origin:China

Fireproof Material Combustion Performance Test Furnace for ASTM E814 Scope of application: Suitable for fire blocking materials used in various openings of buildings, including inorganic fire blocking materials, organic fire blocking materials, and fire ...

Brand Name:kingpo

Model Number:FTech-ASTM162

Place of Origin:china

...flame propagation properties Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heating and a gas burner ignited. This method is widely used in flame propagation properties of the test material for rail train material to evaluate flame...