Impulse Test Generator Test Equipment EVSE Testing Equipment Circuit 1 7KV
![]() |
Impulse Test Generator Test Equipment EVSE Testing Equipment Circuit 1 7KV Complied Standards & Clauses Conform to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, Annex G.10, circuit 1 of Table D.1, etc. and etc.Conform to IEC 62368-1:2018 clause 5.4......
Sinuo Testing Equipment Co. , Limited
|
IEC 62368-1 Test Generator , Impulse Test Generator Circuit 1 Of Table D.1.
![]() |
Impulse test generator circuit 1 of Table D.1. 1950S pulse generator, is a test instrument for generating pulse signal and HVDC signal. This instrument is designed and manufactured according to Appendix N.1 of GB4943.1-2011 (IEC60950-1:2005,MOD) ( IEC62368......
KingPo Technology Development Limited
|
IEC 60335-1 Clause 14 Impulse Test Generator Max. 12.5kV Transient Over Voltage Testing
![]() |
IEC 60335-1 Clause 14 Impulse Test Generator Max. 12.5kV Transient Over Voltage Testing Product Information: Standard: Conform to IEC 60335-1 clause 14, etc. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance. Test......
Sinuo Testing Equipment Co. , Limited
|
1.2/50us Impulse Voltage Generator For Impulse Dielectric Withstand Test For EVCS
![]() |
...Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test......
Pego Electronics (Yi Chun) Company Limited
|
IEC60255-5 Test Equipment Impulse Voltage Test Generator Output Resistance 2Ω、500Ω±10%
![]() |
IEC60255-5 Test Equipment Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5% Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30% Half value of after wave time 50μs ±20% Capacitance 0.8U Output polarity ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60255-5 Impulse Voltage Test Generator
![]() |
IEC60255-5 Impulse Voltage Test Generator Parameters: Output voltage 12kV (Max) ±5% Impulse wavefront time: Impulse wavefront time: Impulse wavefront time: 1.2μs ±30% Half value of after wave time 50μs ±20% Capacitance 0.8U Output polarity Positive, ......
Dongguan Kingpo Technology Limited
|
Shock Test System Comply With IEC-68-2-27 MIL-STD-810F International Standard
![]() |
...Test System Comply With IEC-68-2-27 MIL-STD-810F International Standard Product Option Highlights Low frequency Seismic Base to limit the shock energy that transmits to the floor Customized table mounting patterns available Low Impulse Kits to extend low level testing capability Dual Mass Shock Amplifiers to generate extremely high acceleration levels (10,000g+) Hold Down Fixtures for securing test......
Labtone Test Equipment Co., Ltd
|