Sign In | Join Free | My ecer.jp |
|
Categories | Optical Transceivers |
---|---|
Brand Name: | SONBORN |
Model Number: | SN-SFP-GE-BX35-40 |
Certification: | CE FCC ROHS |
Place of Origin: | CHINA |
MOQ: | 1PC |
Price: | Please contact us |
Payment Terms: | T/T |
Supply Ability: | 5000PCS |
Delivery Time: | 5~8 Workdays |
Packaging Details: | Cartons |
Form Factor: | SFP |
Wavelength: | 1310/1550nm |
Connector: | Simplex LC |
Max. Data Rate: | 1.25Gbps |
Commercial Temperature Range: | 0 to 70°C / -40 to 85°C |
Max. Cable Distance: | 40KM |
Company Info. |
Sonborn Technology Co., Ltd |
View Contact Details |
Product List |
SONBORN’s SN-SFP-GE-BX35-40 SFP Transceivers are a high performance, cost effective module which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1310 nm DFB laser, up to 21dB link budge ensure this module 1000Base-EX Ethernet 40km application.
Features
Application
Recommended Operating Environment
Parameters | Symbol | Min. | Typical | Max. | Unit | |
Case operating Temperature | Industrial | TC | -40 | 85 | °C | |
Extended | -5 | 85 | °C | |||
Commercial | 0 | +70 | °C | |||
Supply Voltage | VCC | 3.135 | 3.465 | V | ||
Supply Current | Icc | 300 | mA | |||
Inrush Current | Isurge | Icc+30 | mA | |||
Maximum Power | Pmax | 1 | W |
Electrical Characteristics(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Input differential impedance | Rin | 90 | 100 | 110 | W | 1 |
Single ended data input swing | Vin PP | 250 | 1200 | mVp-p | ||
Transmit Disable Voltage | VD | Vcc – 1.3 | Vcc | V | 2 | |
Transmit Enable Voltage | VEN | Vee | Vee+ 0.8 | V | ||
Transmit Disable Assert Time | Tdessert | 10 | us | |||
Receiver Section: | ||||||
Single ended data output swing | Vout,pp | 250 | 800 | mv | 3 | |
LOS Fault | Vlosfault | Vcc – 0.5 | VCC_host | V | 5 | |
LOS Normal | Vlos norm | Vee | Vee+0.5 | V | 5 | |
Power Supply Rejection | PSR | 100 | mVpp | 6 |
Note:
1. AC coupled.
2. Or open circuit.
3. Into 100 ohm differential termination.
4. 10 – 80 %
5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
6. All transceiver specifications are compliant with a power supply sinusoidal modulation of 10 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 1000.
Optical Parameters(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Center Wavelength | λc | 1290 | 1310 | 1330 | nm | |
Spectral Width | σ | 1 | nm | |||
Sidemode Supression ratio | SSRmin | 30 | dB | |||
Optical Output Power | Pout | -2 | +3 | dBm | 1 | |
Extinction Ratio | ER | 9 | dB | |||
Optical Rise/Fall Time | tr / tf | 260 | ps | 2 | ||
Relative Intensity Noise | RIN | -120 | dB/Hz | |||
Total Jitter Contribution | TX Δ TJ | 0.284 | UI | 3 | ||
Eye Mask for Optical Output | Compliant with IEEE802.3 z (class 1 laser safety) | |||||
Receiver Section: | ||||||
Optical Input Wavelength | λc | 1530 | 1550 | 1570 | nm | |
Receiver Overload | Pol | -3 | dBm | 4 | ||
RX Sensitivity | Sen | -24 | dBm | 4 | ||
RX_LOS Assert | LOS A | -40 | dBm | |||
RX_LOS De-assert | LOS D | -25 | dBm | |||
RX_LOS Hysteresis | LOS H | 0.5 | dB | |||
General Specifications: | ||||||
Data Rate | BR | 1.25 | Gb/s | |||
Bit Error Rate | BER | 10-12 | ||||
Max. Supported Link Length on 9/125μm SMF@1.25Gb/s | LMAX | 40 | km | |||
Total System Budget | LB | 21 | dB |
Note
1. The optical power is launched into SMF.
2. 20-80%.
3. Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253.
4. Measured with PRBS 27-1 at 10-12 BER
SONBORN's Optical transceivers are 100% compatible with major brands like Cisco, Huawei, Extreme, HP, Finisar, Broadcom, Foundry, Alcatel, D-link, Enterasys, Netgear, Juniper, Nortel, Linksys, Allied, Zyxel, Dell, Redback, H3C, ZTE, Ruijie, Ciena , Alcatel-lucent, etc.,
If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options
Qualified through a rigorous process with advanced equipments to ensure you get the high quality and reliable optics.