HART Multiplexer Master PEPPERL FUCHS Kfd2 Hmm 16

Product Details:
Manufacturer : Pepperl+Fuchs
Product No. : KFD2-HMM-16
Product Type : HART Multiplexer Master

Features:

• 16-channel
• 24 V DC supply (Power Rail)
• HART field device input (revision 5 to 7)
• Up to 15 KFD0-HMS-16 slave units can be connected
• Up to SIL 3 acc. to IEC/EN 61508

Function

This HART Multiplexer Master operates up to 256 analog field instruments. The built-in slave unit in the HART master operates the first 16 field instruments. If more than 16 field instruments are required, up to 15 additional HART Multiplexer Slaves KFD0-HMS-16 can be connected.

The slave units are connected to the master with a 14-pin flat cable. The connector for the ribbon cable is found on the same housing side as the connectors for the interface and the power supply.

The analog signals are separately linked to a termination board via a 26-pin flat cable for each unit. Sixteen leads are reserved for the HART signal of the analog measurement circuits. The remaining 10 leads are sent to ground.

This unit is designed with removable terminals and can be connected to the Power Rail.

Technical data

1. Product Description

HART Multiplexer Master

2. Functional safety related parameters

Safety Integrity Level (SIL): SIL 3

3. Supply

Connection: terminals 17+, 18-

Rated voltage: 20 ... 32 V DC typical at 100 mA

Power consumption: max. 3 W

4. HART signal channels (non-intrinsically safe)

Conformity: HART field device input (revision 5 to 7)

Connection: 26-pin flat cable for analog connections

14-pin flat cable for master-slave connection between KFD2-HMM-16 and KFD0-HMS-16

Leakage current: < 3 µA at -20 ... 85 °C (-4 ... 185 °F)

Terminating resistor: external 230 ... 500 Ω standard (up to 1000 Ω possible)

Output voltage: ≥ 400 mV _ss (with the terminator resistance specified above)

Output resistance: 100 Ω or smaller, capacitive coupling

Input impedance: according to HART specification

Input voltage range: 0.08 ... 4 V _ss ; typ. ± 5.2 V as local reference

5. Interface

Transfer rate: 9600, 19200, or 38400 Bit/s (selectable with DIL switch (2 and 3) by the user)

Type: RS-485 , 2-wire multidrop

Address selection: One of 31 possible addresses selectable per DIL switch (4 ... 8)

6. Indicators/settings

Control elements: DIP switch

Configuration: via DIP switches

Labeling: space for labeling at the front

7. Conformity

Degree of protection: IEC 60529:2001

8. Ambient conditions

Ambient temperature: -20 ... 60 °C (-4 ... 140 °F)

9. Mechanical specifications

Degree of protection: IP20

Connection: screw terminals

Mass: approx. 250 g

Dimensions: 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1

Height: 107 mm

Width: 40 mm

Depth: 115 mm

Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001

Related Models:

Company Introduction:
Achievers Automation Limited has more than 10 years experience in the market of Industrial Automation, specialized in reselling factory sealed Probe, Sensor, DCS,isolator barrier, HMI, PLC,Adapter,Profibus connector and cable from Brands as BENTLY NEVADA, Endress+Hauser, YOKOGAWA,MTL,Allen-Bradley, Pepperl+Fuchs,Rosemount, ASCO, Schneider, Lenze, Pro-face, Mitsubishi, Omron, Lenze, Delta, Honeywell, Siemens and etc. If you have any request, please do not hesitate to contact us.

FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.

Achievers Automtation Limited deals with a complete range of industrial automation components and instruments with more than 12 years’ experience, and always try best to provide quality goods and timely services to our valued customers from over 45 countries worldwide.

Achievers serves the Oil & Gas industries, EPC contractors, System Integrators and other industrial automation and process control companies worldwide. The industries we serve include Oil & Gas, Chemical, Petrochemical, Mining, Energy & Utilities, Pharmaceuticals, Electronics, Food and etc.

The company provides a diversified range of products to meet any process control and automation challenges in the industry. We stock and distribute pressure & temperature transmitters, level controller & transmitters, temperature probes, flowmeter, vibration monitoring devices, chart recorders, sensors, PLC, DCS, HMI, measuring instruments and other field instruments.

Below are the TOP BRANDS we handle in the past 12 years:

Bently Nevada            3500 Vibration Monitoring System&3300 Proximity Probes,Sensors & Transducer Systems

ALLEN BRADLEY       Industrial Control Products:1783-US8T,1783-US8T

Pepperl-Fuchs             Industrial Sensors & Isolated Barrier:Safety barrier KFD2-SR2-Ex2.W,Safety barrier KFD2-STC5-EX1

MTL Instruments         Isolated Barrier:Safety barrier MTL5541,Safety barrier MTL5544D

Endress+Hauser         Flow, Level, Liquid Analysis Instrument:e&h CPS12D,CPS11D-7BA21

HONEYWELL             Switches & Transmitter:XNX transmitter honeywell price

EMERSON                  Hand Communicator TREXCHPNAWS1S

YOKOGAWA               DCS & Field Instruments & Process Analyzers

Rosemount                  Analytical Products

ASCO                          Solenoid Valves

IFM                              Sensors & Controllers

ABB                             V18345 Valve Positioner

FISHER                       DLC3100 Digital Level Controller

TELEDYNE                 Oxygen Sensor & Fuel Cell

VEGA Level                Measurement Products

AUMA                         Electric Actuators and Gearboxes

SMC                           Controls, process, and Industrial products

SICK                           Industrial Sensors

FESTO                       Pneumatic & Electric Automation Products

BECKOFF                  Controllers & I/O Modules

BALLUFF                   Linear Position Sensors

SCHMERSAL            Safety switches & Safety Systems

In achieving business objectives, we highly value integrity, trust, honesty, social responsibility and moral and business ethics.The company has put a lot effort in establishing strong ties with the customers. Our effort in sharing problems encountered by the customers and finding the solution hand-in-hand with them has made us the first-choice supplier for the customer. We have always striven to provide the right things for the right customers.In addition, our ability to source a wide range of parts and products for our diversified customers has fortified our status as an all-purpose supplier.

In the years to come, we will continuously strive to incorporate upgrade in the areas both of customer service, and product and engineering knowledge. Not only do we want to grow together with our customer, but we also want to make contribution.

Legal Disclaimer

www.achievers-automation.com is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers that are offered in www.achievers-automation.com All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product in our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.