PERC Customizable Solar Pv Module Photovoltaic Roof Panels 12.7-13.2A Imp

Highly Customizable Solar Panel Shingled Design with Junction Box 3 Bypass Diodes

Higher Yield Due to Better Shading Response

Half Cell Module comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose which has separated current paths. When a module is shaded, only one side shaded array's current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade will be 50% less. By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.

Electrical Characteristics (STC/NOCT)
Module Type	SW400M10	SW405M10	SW410M10	SW420M10
Maximum Power- Pmax(W)	400	405	410	420
Open Circuit Voltage - Voc(V)	37.07	37.23	37.32	37.45
Short- Circuit Current - Isc(A)	13.79	13.87	13.95	14.02
Voltage at Pmax -Vmp(V)	31.01	31.21	31.45	31.68
Current at Pmax - Imp(A)	12.9	12.98	13.04	13.28
Module Efficiency -ηm(%)	20.5	20.8	21.0	21.3
Power Tolerance(W)	(0,+4.99W)
Maximum System Voltage(V)	1500Vdc (IEC / UL)
Maximum Series Fuse Rating (A)	25A
STC : Irradiance 1000W/m 2 ,Cell Temperature 25℃,Air Mass 1.5
External Dimensions	1722x1134x30mm
Weight	21.0kg
Solar Cells	Mono crystalline 182mm (2x54pcs)
Front Glass	AR Coated 3.2 mm tempered glass
Junction Box	IP68
Output Cables	4.0mm², 30cm (+) ,30cm (-), length can be customized

A Grade Material

Glass

* High-transmittance and low reflection Inspection:GB15763.2-2005.ISO9050 * High solar transmittance * High mechanical strength

Solar Cell

* High efficiency is 22% * High shunt-resistance: adapt the several environmental conditions. * By pass diode minimizes the power drop by shade. * Excellent low light effect Low breakage rate

Frame

* Aluminium extrusion profile with prompt delivery. * Available in customized surface finish. * Excellent material for smooth and subtle edges. * Extrusion for construction and other industrial purposes.

Junction Box

* Unique split junction box design to minimize the loss caused by occlusion * Combination of series circuit and parallel circuit, reduced internal power loss. * IP68 Waterproofness, Full-Glue-Filled

Q1:Are you a factory or trade company?

We are a factory who has more than 10 years experience in manufacturing; strong aftersale service team and technical support. Free design according to client requirements.

Q2:Whats the MOQ? We have stock and semi-finished products with enough base materials for new sampleand order for all models, So small quantity order is accepted, it can meet your require.ment very well.

Q3:Why others price much cheaper? We try our best to ensure our quality to be the best one in the same level price products. We believe safety and effectiveness are the most important.

Q4:Can I have a sample for testing?

Yes, you are welcome to test samples before quantity order; Sample order will be sentout 2-3 days generally.

Q5:Can Iadd my logo on the products?

Yes,OEM and ODM are available for us. But you should send us the Trademark authori-zation letter.

Q6 :Do you have inspection procedures?

100% self-inspection before packing.

We located in APEC High-Tech Industrial Park, Hefei National Hi-Tech Industrial Development Zone, is a professional and high-tech enterprise that engaged in wind generation, photovoltaic system and other renewable energy R&D, manufacturing and marketing.
Sunway power main products are PV solar system, portable solar system, Solar panels, MPPT solar and wind controller series, PV and wind system controller series, solar inverter. Our products had many intellectual property, and gained 12 national patents, software copyright certificate, passed the testing from national testing organization and CE Certification Institution. Also we have registered brand successfully. Our company has been rated Hi-tech Enterprise and gained ISO-9001certificate since August, 2011 year.