KTG153 Dew Point Meter for Dew Point Sensors in the Food Industry

KTG153 Dew Point Meter for Dew Point Sensors in the Food Industry

Introduction

The KTG153 dew point meter adopts an imported polymer-material capacitive-resistive dew point sensor, which features a fast response speed and high sensitivity. It is easy to operate. This meter can measure the trace moisture content in various gases and is suitable for all kinds of online analysis scenarios with strict requirements for moisture content control.

Application Areas

Petrochemical industry, natural gas, industrial gases, semiconductor industry, drying industry, food industry, power industry, machinery manufacturing, air separation industry, pharmaceutical industry.

Instrument Features

Imported polymer-material capacitive-resistive dew point sensor, with rapid response and high sensitivity.

Adopts electronic flow control, without any clogging issues.

Equipped with a 128×64 liquid crystal display and a full Chinese operation menu, which is simple and convenient.

Automatically stores measurement data. The length of the recording interval can be freely set, and the recorded data can be displayed in the form of curves or lists for easy browsing.

Alarm points can be set arbitrarily, with audible and visual alarm output.

Alarm points and upper and lower control points can be set arbitrarily within the full measurement range.

Standard RS232 or RS485 communication ports, enabling two-way communication with computers.

Technical Parameters

Measurement range: -80.0℃～+20.0℃; -100.0℃～+20.0℃

Maximum allowable error: ±1.5℃ (above -60℃); ±2.0℃ (below -60℃)

Repeatability: ±1.5℃

Preheating time: ≤5min

Sample gas flow rate: (2500～3000)mL/min

Sample gas pressure: 0.05MPa≤inlet pressure≤0.50MPa

Resolution: 0.1℃

Output signal: Optional (4～20)mA or (0～10)mA

Contact capacity: 220VAC, 1A; 24VDC, 2A

Working power supply: (220±22)VAC, (50±5)Hz

Working environment: Temperature: -15℃～＋45℃; Humidity: ≤90%RH

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.