Diamond Cutting Laser Diode Pump Module 75W Output Power With Nd YAG Rod

75W Output Power Diamond Cutting Laser Diode Pump Module with Nd:YAG Rod

Description

HTOE DPL-1064-S3-*075 is a diode side-pumped Nd:YAG laser module with 75W output power at 1064nm centerwavelength. It’s an ideal engine to drive high-end DPSS laser systems. With a 3mm diameter, 78mm length rod and special symmetrical pumping structures, the gain modules deliver low-rank beam profile with excellent beam quality and serve to be used in both resonator and amplifier designs.

LD side-pumped laser module is high power laser module, which is easy to be integrated into customer's laser systems. Adopting laser diode arrays as pumping sources, it has the advantage of high electro-optical conversion efficiency, reliable performance, compact size, etc. It’s core device of all-solid-state laser could replace traditional lamp-pumped condenser cavity. It provides high quality pumping sources for industrial processing and scientific applications.

Features

• DPSS Nd:YAG Laser Module
• Stable output laser power ;
• More than 75W output power @ 1064nm wavelength
• High optical-to-optical conversion efficiency (>50%);
• Low maintenance;
• Compact in size;
• Over 10000 hours' lifetime.

Applicaitons

• Laser trimming;
• Laser marking;
• Material cutting;
• Laser micro-processing;
• Laser medicine;
• Science & defense.

Parameters(20℃)

Package Information

75W(75N)

Function Curve

The curve data are measured under the following test conditions: Cavity length 450mm, output mirror transmission 20%, while operating temperature 20℃.

75W(75N)

Principle

Side pumping is a technique of optically pumping a laser gain medium (usually of a solid-state laser), where the pump light is injected from the side, i.e. in a direction which is roughly perpendicular to that of the laser beam. For example, Figure 1 shows a side-pumped rod, where pump light from diode bars is injected through slits in an otherwise reflecting outer surface around a laser rod. Figure 2 shows a laser setup containing a side-pumped rod. An alternative approach is pumping along the laser beam (→ end pumping).

Figure 1: Side-pumped rod of a solid-state laser.

The key advantage of side pumping is that it allows the use of pump sources with very low spatial coherence, such as arc lamps or high-power diode bars. Also, side pumping makes it easy to combine multiple pump sources. It is possible e.g. to pump a rod laser with several diode bars (side-by-side) which have fast axis collimation only; the total width of the emitting region can approach the rod length. Another advantage is that the absorbed pump power can be smoothly distributed in the longitudinal direction. For such reasons, side pumping is often used for high-power solid-state lasers.

Notice

1. HTOE offers 13 months warranty period for DPL series products.
2. The above function curves are for reference only, please see the test data attached to the module as criterion.
3. For more information, please contact Hi-Tech Optoelectronics Co., Ltd.

Hi-Tech Optoelectronics Co., Ltd. is a wholly-owned subsidiary of CECEP, is a high-tech enterprise established on the basis of National Optoelectronic Engineering Research Center.

• Established in 1999
• Registered Capital：227 million RMB
• Located in Shahe Industrial Park, Beijing
• Employees：~180
• Products: Semiconductor Lasers

Headquarter in Beijing：

• Over 3000m² of manufacturing space, and more than 1500m² clean room with class 1,000 and 10,000 ；
• The new factory planned with 11,000m², and under construction now.

R&D Platform

• National Optoelectronic Engineering Research Center
• Post-doctoral Research Center
• Engineering Technology Research Institute Optoelectronics Branch of China Energy Conservation Group

More than 30 core patents：

• Ep-Wafer Structure Design
• COMD control
• Electrode process
• Chip process
• Chip packaging
• Beam shaping
• Fiber coupling

Leading provider of laser diodes and laser-based solutions in China.