Industrial Pure 1070 Polished Aluminum Sheet Temper O/H High Plasticity Cable Shield

Industrial Pure 1070 Polished Aluminum Sheet Temper O/H High Plasticity Cable Shield

Description

Aluminum 1070 is industrial pure aluminum, not belong to aluminum alloy, the minimum content of aluminum is 99.7%. 1070 aluminum has the characteristics of high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, but its strength is low. It is not strengthened by heat treatment, and its cutting property is not good. Contact welding and gas welding are acceptable.

Advantages

Long service life, low cost, and high recovery value.

Heat Treatment

Industrial pure aluminium can not be strengthened by heat treatment, but can be strengthened by cold deformation. The only form of heat treatment is annealing.

1.Complete annealing: heating 390-430 degrees centigrade,holding time is from 30mintues to120 minutes depends on different thickness of material; cooling with furnace at 30-50 degrees centigrade per hour to 300 degrees centigrade, and then air-cooling.
2.Rapid annealing: Heating 350-370 degrees centigrade, holding time 30-120 minutes depending on material effective thickness; Air or water cooling.
3.Quenching and aging: quenching 500-510 degrees centigrade, air cooling; artificial aging 95-105 degrees centigrade, 3 hours, air cooling; natural aging room temperature 120 hours.

Composition Specification (% Max)

Application

Industrial pure aluminium 1070 can not be strengthened by heat treatment, but can be strengthened by cold deformation. The only form of heat treatment is annealing. Widely used in products with low strength requirements, such as chemical instruments, sheet parts, deep drawing or spinning concave utensils, welding parts, heat exchangers, bell and disk surfaces, nameplates, kitchen utensils, decorations, reflective appliances, aluminum foil is made into gaskets and capacitors, isolation network of electronic tubes, protective sheath of wires and cables, nets, wiring cores and parts and decorations of aircraft ventilation system.

​

Port: Shanghai,Qingdao, Tianjin, Guangzhou,Shenzhen,...,etc.

Lead time: 2-4weeks

Payment terms: T/T, L/C and others

Samples: Available

Packaging: below pictures for your easy reference

Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum products for the packaging, electronics, automotive and transport, building and construction, shipbuilding, automotive, energy, industrial, HVAC and Solar markets. Products cover primary aluminum in the form of ingots, value-added products such as rolled products, extrusions and foils.

Rising International exports approximately 60% of its production to more than 30 countries and offers reliable and competitive solutions that meet the requirements of the most demanding global customers. Rising International is committed to strengthening the viability of its customers and communities, shaping a sustainable future through innovative aluminium solutions.

Rising International enjoys a leadership position in aluminium and downstream value-added products in China.  Rising International will continue to be down-to-earth, actively explore and continue to promote the company's strategy of diversification and professionalism.