H - 2H Pencil Hardness Electrostatic Powder Coating RAL 1001 Beige Color Powder Coat

Electrostatic thermoset polyester powder coating ,RAL 1001 beige color powder coat

Powder coating may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as household appliances, aluminium extrusions, drum hardware and automobile and bicycle parts.

Pretreatment:
It is essential to ensure that the surface to be coated is free from dust or rust or scale and also oil, etc. Chemical pre-treatment of the substrate is essential to increase the long term corrosion resistance.

Application:

Suitable for application by proprietary manual or automatic discharge equipment and triboelectric charging guns.

Solvent & Chemical Resistance:
Good resistance to acids, alkalis and solvents at room temperature. May be attacked by dilute nitric acid, ketones and trichloroethylene. Refer to information sheet ‘Chemical Resistance of Powder’.

Exterior Durability:
Some chalking will occur after six months but protective qualities are unimpaired providing adequate pre-treatment is used.

Health & Safety:
Use in accordance with the Code of Safe Practice published by the Paintmakers Association of Great Britain, “Application of Powder Coatings Electrostatic Spraying”. Copies are available on request. To prevent inhalation of airborne powder, face masks capable of removing respirable dust should be worn. Skin contact should be avoided and any deposited powder removed with soapy water. Some powders, mainly bright red and yellow shades, contain lead chrome and cadmium pigments.

SPECIFICATION:

Powder Coating Processes:

Powder coating processes vary by the type of material being applied; however, they can generally be divided into four functions:

• Preparation of the surface
• Application of the powder
• Heating of the part
• Curing of the coating

STORAGE

• Under dry conditions ,good ventilation at a temperature not exceeding 30 C,humidity < 60%.
• Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
• Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
• Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture

Nanjing Powder New Material Co., Ltd is a professional powder coating manufacturer and exporter in China, Located in Nanjing,the center of powder coating industry,we control the cost well and it is convenient to arrange delivery in time.

With 11 years experience, we focus on developing the technology in powder coating products. With good performance on corrosion resistance and durability due to superior edge coverage, thick film build and no primer required, our products are very popular which bring us more repeat orders.

We are custom powder coatings maker. We provide powder coating companies active in industries related to appliances, furniture, building components, pipelines and general industries. We are professional on epoxy powder, polyester powder, hybrid powder, polyurethane powder, and acrylic powder. We are much stronger on powder coating colors. We provide colors according to pantone, We can also meet your special demands on candy ,metal flake and texture finishes.We have expert team on powder coating, solutions on powder coatings are available if you suffer any problems.

Powder coatings make our life more colorful, We NANJING POWDER company can help you more profitable. Welcome to contact us for more details.