ASTM B338 Gr2 Seamless Titanium Tubing Cold Rolled For Heat Exchanger

ASTM B338 Gr2 Titanium Seamless Tube for Heat Exchanger

1. Grade:

Gr1,Gr2,Gr3,Gr5,Gr7,Gr9,Gr12,Gr16,

TA0,TA1,TA2,TA9,TA10,

BT1-00,BT1-0,Ti-6Al-4V(TC4),Ti-5Al-2.5Sn(TA7)

2. Dimension

Outer Diameter: 6-65mm

Wall Thickness: 0.3-5mm

Max Length: 15m for seamless 20m for welded

Regualer size:

19*1.2mm 19*1.5mm

25.4mm 38mm 32mm

Special size 19*3.3mm

3. Standard:

ASTM B338/SB861, ASTM SB338/SB861, EN10204

4. Certification:

ISO9001, PED, DNV

5.Production method:

Cold rolled

6.Application:

Industrial, Heating Exchanging, Condenser, Medical, Chemical, Oil, Sports, Bike,

Aerospace and Aeronautics, Seawater desalinationm, power station etc.

Titanium and its alloys have many excellent properties, which are mainly embodied in the following aspects:

1. High strength. Titanium alloy has high strength, its tensile strength is 686 - 1176 MPa, and its density is only about 60% of steel, so its specific strength is very high.

2. High hardness. The hardness HRC of titanium alloy (as annealed) is 32-38.

3. Low modulus of elasticity. The elastic modulus of titanium alloy (as annealed) is 1.078*10-1.176*10MPa, which is about half of that of steel and stainless steel.

4. Excellent performance at high and low temperatures. At high temperature, titanium alloy can still maintain good mechanical properties, its heat resistance is much higher than that of aluminium alloy, and its working temperature range is wider. At present, the working temperature of new type of heat-resistant titanium alloy can reach 550-600 degrees C. At low temperature, the strength of titanium alloy is higher than that at normal temperature, and it has good toughness. Low temperature titanium alloy has -25 degrees C. It also maintains good toughness at 3 C.

5. Titanium has strong corrosion resistance. Titanium can form thin and compact titanium oxide film on the surface of Titanium in air below 550 C. Therefore, its corrosion resistance is better than that of most stainless steels in oxidizing media such as atmosphere, sea water, nitric acid and sulfuric acid and strong alkali.

Chemical Requirements

Tensile requirements

Who We are ?

-------A professional steel pipes materials inventor, manufacturer and solution provider
Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the factories of Seamless Steel Tubes with Carbon and Alloy Steel Grade, Welded Precision Steel Tubes,DOM Steel Tubes, Seamless & Welded Stainless Steel Tubes with Nickel and Alloy Steel Grade.
Our factory was established since 1997, with the name of TORICH INTERNATIONAL LIMITED. The factories’ technicians are of great engineering experience in steel pipe industry for more than 20 years, which are in great command of production technology for Cold Drawing and Cold Rolling. So we have strong technician team and manufacturing capability.

What products we do?

------- Invent and produce various Precision Steel Pipes

Our steel pipes cover the following ranges:
Seamless Precision Steel Pipes

Bearing Steel Tubes
Welded Precision Steel Pipes, with DOM production
Seamless Heat Exchanger Steel Pipe
Seamless Boiler Steel Pipes

Honed Tubes

Hydraulic Cylinder Steel Tubes

Hydraulic Telescopic Cylinder Tubes
Seamless Structural Steel Pipes
Seamless Mechanical Steel Pipes
Seamless Alloy Steel Tubes & Pipes
Seamless Stainless Steel tubes
Welded Stainless Steel Tubes
Seamless Stainless Steel Tubes & Pipes
Welded Stainless Steel Tubes & Pipes
Seamless Carbon Steel Tubes & Pipes
Nickel Alloy Steel Tubes & Pipes

What TORICH do:
1. Producing Steel Tubes
2. Selling both on Domestic and International Market
3. Precisely Targeting Customers’ Requirement- Sourcing the right factory for right products for Customers

Products Application:
Oil Cylinders
Air Cylinder, 
Automotive Cylinder Liners
Boilers, Pressure Vessels
Shell & Heat Exchangers
Jack Lifting
Telescopic Systems
Pneumatic Cylinders
Agricultural Machineries

Size range is: 
O.D. 4-350mm, 
W.T. 0.5-30mm, 
Length: according to customer’s requirement and agreement
 

Steel Grade:
Carbon Steel Grade:
ST35.8, ST37.0, ST44, ST52;
E155, E195, E215, E235, E275, E355;
195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2;
SAE1010, SAE1020, SAE1026, SAE1035, SAE1045;

Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc.
Alloy Steel Grade:
T2, T5, T9, T11, T12, T17, T21, T22, T91,T92, 15Mo3,16Mo3, 13CrMo44;
SAE4130, SAE4140, 40Cr, 40Cr4, 10CrMo910, 12CrMo910, 11CrMo910,
25CrMo4, 35CrMo, 35CrMo4, 42CrMo4, 34CrMo4, 20MnV, 20MnV6,20CrMn;
Carbon steel tube: A179,A192,A210,DIN17175,etc.

Bearing Steel Grades:
GCr15 52100 suj2 suj3 100Cr6 SKF3S SKF3S 20CrNiMo 8620H 4118H;

Nickel Alloy Grade:
N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc.

Austenitic/Super Austenitic Stainless Steel Grade:
304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc. 

Ferrite/Martensite Stainless Steel Grade:
TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc. 

Duplex/Super Duplex Stainless Steel Grade:
S31803, S32304, S31500, S32550, S32750, S32760, etc. 
Corporate Culture:
We focus on Quality First, Quality Traceability, and Quality Stability!
We focus on Customer First, People First, and Quality-Oriented!
Success:
First factory started in 1997, in the name of Torich , now covers 50000 square meters of factory building, with more than 100employees, and over 45 million RBM assets.
In 2008, we started the company of Torich International Limited for international business and marketing.
Welcome partners from all over the world for long term cooperation!