10MPa Gas Pressure Sintering Furnace Degreasing And Pressure Sintering Integrated

10MPa pressure sintering furnace made in China, degreasing and pressure sintering integrated furnace

Gas Pressure Sintering Furnace​ Description:

gas pressure sintering furnace is single-chamber, horizontal and periodic heating.It adopt low voltage and large current graphite heating element to heating, and it has multiple heating units, each unit controls the temperature separately.The whole process is automatically controlled, monitored, tracked and displayed and recorded by the computer.

The gas pressure sintering furnace is a vacuum gas pressure furnace which is filled with a high pressure gas during the sintering process. The sintering process is to heat the sintered material under negative pressure to grow it; to be sintered under normal pressure to reach a fatigue state, so that the pores in the material are closed; finally, sintering under high pressure further increases the fatigue state of the material and The stress in the material is quickly removed, and the material is further consolidated to remove residual pores. Therefore, after high temperature and high pressure sintering process, all aspects of mechanical properties (hardness, flexural strength, Weibull distribution mode, fracture toughness, etc.) are superior to ordinary sintering processes.

Gas Pressure Sintering Furnace​ Application:

Pressure sintering furnace is very suitable for the sintering of various ceramic materials, alloy materials and metal materials, especially the materials which will decompose after the temperature rises and the hardness of the sintering in the conventional method can not meet the requirements. As with vacuum thermal sintering, there are no restrictions on the sintered part or its geometry in this process. Sintering of conventional synthetic materials. Sintered silicon nitride and sialon ceramics have excellent mechanical properties after sintering. They can be used as cutting tools, rotors for turbocharger engines and components for engines. and many more).
Sintered SiC ceramics (can be used to corrode high mechanical stress parts in the environment, etc.).
High temperature super alloy (for mechanical stress parts in high temperature environments).
Cemented carbide, especially for sintering carbides with low cobalt content and high quality mechanical parts.
Production of SSN batch parts in the automotive industry.

Gas Pressure Sintering Furnace​ Technical parameters:

       Zhuzhou Ruideer Intelligent Equipment Co., Ltd. is a manufacturer of powder metallurgy solutions for the whole industry chain. It integrates process development, production, sales and coating services of sintering furnace, PVD coating furnace and CVD coating furnace. Ruideer has standardized workshops and office buildings, covering an area of more than 19,000 square meters, with more than 170 employees. Ruideer’s productivity reaches 120 sets of pressurized sintering furnaces per year, 500,000 pieces of PVD coating per month, and 250,000 pieces of CVD coating per month.

In the past years, Ruideer has been rated as a national high-tech enterprise, a national-level Specialized and Sophisticated enterprise (appointed as a national key little giant enterprise in 2022), a little giant enterprise in Hunan Province, and a single champion of pressure sintering furnace in Hunan Province, and gained 85 intellectual property authorizations.

Nearly 400 sets of degreasing gas pressure sintering furnaces and 180 sets of degreasing vacuum pressure sintering furnaces have been produced. In order to continuously meet and exceed customer needs, Ruideer provides customers with "targeted application, key development, and tailor-made" characteristic services. The products are sold both at home and abroad (US, Russia, EU, Japan, Ukraine, South Korea, Vietnam and other countries), providing 24-hour response services to domestic customers. Ruideer's products have been widely used in the cemented carbide, ceramic, MIM stainless steel, semiconductor industry.

In line with the enterprise spirit of "quality-oriented, continuous innovation, service satisfaction, unity and hard work, and common development", Ruideer is guided by market demand and business development, supported by key technologies, closely following customer needs, and is committed to serving customers with stable and reliable technical products and contribute to the application in the field of powder metallurgy!

Our standard sintering furnace model include (but are not limited to):

• Gas pressure sinteing integrated furnace（1MPa/2MPa/6MPa/10MPa)
• Debinding vacuum sintering integrated furnace
• MIM stainless steel sintering furnace
• Silicon nitride sintering furnace
• Silicon carbide sintering furnace
• Metal sintering furnace (Mo/W heater)
• Vacuum brazing furnace
• CVD coating furnace