| Sign In | Join Free | My ecer.jp |
|
| Sign In | Join Free | My ecer.jp |
|
| Categories | Inconel Pipe |
|---|---|
| Brand Name: | HT |
| Model Number: | ASTM B423 Inconel 825 Inconel Pipe ASME B36.10 ASME B36.19 Seamless ERW EFW |
| Certification: | ISO9001 |
| Place of Origin: | China |
| MOQ: | 1 pcs |
| Price: | USD 1000/piece |
| Payment Terms: | L/C,T/T, Western Union |
| Supply Ability: | 1000 pcs per month |
| Delivery Time: | 30-35 working days |
| Packaging Details: | wooden case, wooden pallet |
| Product Type: | Pipe or Tube |
| Name: | ASTM B423 Inconel 825 Inconel Pipe ASME B36.10 ASME B36.19 Seamless ERW EFW |
| End: | Beveled End or Plain End |
| Technique: | Hot rolling / Hot work/ Cold rolling/ Cold-drawn |
| Standard: | ASME B36.10 or ASME B36.19 |
| Material: | Nickel alloy/stainless steel/duplex stainless |
ASTM B423 Inconel 825 Inconel Pipe ASME B36.10 ASME B36.19 Seamless ERW EFW
ASTM B-423-84 / ASME SB-423
SPECIFICATION FOR NICKEL IRON CHROMIUM MOLYBDENUM COPPER ALLOY
(UNS N08825 AND N08221) SEAMLESS PIPE AND TUBE
| 1.Scope 1.1 This specification covers nickel-iron-chirmium-molybdenum-copper alloys (UNS N08825 and UNS N 082221) in the foem of cold-worked and hot-fianished deamless pipe and tube intended for general corrosive sevic coverd in Spdcificarion B 89. 1.2 The following precautionary caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the reaponsibility of the user of this standard to establish appropriate safety and hwalth practices and determine the applicability of reguatory limitations prior to use. |
TABL1 CHEMICAL REQUIREMENTS
| Element | UNS N08825 | UNS N08221 |
| Nickel | 38.0-46.0 | 39.0-46.0 |
| Chromium | 19.5-23.5 | 20.0-22.0 |
| Iron | 22.0min | 22.0min |
| Manganese | 1.0max | 1.0max |
| Carbon | 0.05max | 0.025max |
| Copper | 1.5-3.0 | 1.5-3.0 |
| Silicon | 0.5max | 0.5max |
| Sulfur | 0.03max | 0.03max |
| Aluminum | 0.2max | 0.2max |
| Titanium | 0.6-1.2 | 0.6-1.0 |
| Molybdenum | 2.5-3.5 | 5.0-6.5 |
TABLE 2 MECHANICAL PROPERTIES OF PIPE AND TUBE
| Alloy | Condition and Size | Tensile Strength, min, ksi(MPa) | Yield Strength 0.2% Offset, min, ksi(MPa) | Elongation in 2 in. or 50 min(4D), min, % |
| UNS N08825 | hot-finished annealde | 75(517) | 25(172) | 30 |
| UNS N08825 | cold-worked annealed | 85(586) | 35(241) | 30 |
| UNS N08825 | hot-forming quality(hot-finished or cold-drawn annealed) | A | A | A |
| UNS N08221 | cold-finished, annealed | 79(545) | 34(234) | 30 |
AHvot-forming quality is furnished to chemical requirements and
surface inspection only.
No mechanical properties are required.
TALBE3 PERMISSIBLE VARIATIONS FOR OUTSIDE DIAMETER AND WALL
THICKNESS
OF SEAMLESS HOT-WORKED PIPE AND TUBEA, B
| Nominal Outside Diameter in.(mm) | Permissible Variations | |||||
| Outside Diameter, in.(mm) | Thickness of Specified Nominal Wall, % | Thickness of Specified Minimum Wall, % | ||||
| + | - | + | - | + | - | |
| 2 1/2(64) to 4 1/2(114), incl | 0.031(0.79) | 0.031(0.79) | 16.0 | 12.5 | 28.5 | 0 |
| Over 4 1/2(114) to 6 1/2(165), incl | 0.047(1.2) | 0.047(1.2) | 16.0 | 12.5 | 28.5 | 0 |
| Over 6 1/2(165) to 9 1/4(235), incl | 0.062(1.6) | 0.062(1.6) | 16.0 | 12.5 | 28.5 | 0 |
| AOvality-For tube 5 in.(127mm) and under in outside diameter, the
tolerance on the outside diameter applies for individual
measurements and includes ovality. For tube over 5 in.(127mm) in
outside diameter, the mean outside diameter shall conform to the
permissible variations of this table and individual measurements
shall not exceed twice the permissible variations of this table.
BEccentricity-The permissible variations in tihs tale apply to
individual measurements including eccentricity. APPENDIXES (Nonmandatory Information) X2. CONDITIONS AND FINISHES NORMALLY SUPPLIED X2.1 Scope X2.1.1 This appendix lists the conditions and finishes in which pipe and tube (other than converter sizes) are normally supplied. These are subject to change, and the manufacturer should be consulted for the latest information available. X2.2 Cold-Worked Tube and Pipe X2.2.1 Cold-Wroked, Annealed, With Ground Outside Diameter - The inside diameter may have a bright finish when material is annealed in a protective atmosphere; otherwise, the inside diameter is supplied descaled as necessary. It is avable in sizes 1/2 to 4 in. (12.7 to 102mm), inclusive, in outside diameter in both normal and heavy-wall tube, and pipe sizes, all schedules, of corresponding outside-diameter dimensions. X2.2.2 Cold-Worked, Annealed, and Pickled (Not Ground) - Outside and inside diameter will have dull, matte (pickled) surfaces. It is available in sizes 1/2 to 6 5/8 in. (12.7 to 168 mm) inclusive, in outside diameter in both normal and heavy-wall tube, and pipe sizes, all schedules, of corresponding outside diameter dimensions. X2.3 Hot-Worked Tube X2.3.1 Hot-Worked-Annealed, (Not Pickled) Tube - Has an oxide surface resulitng from the hotworking operation. Intended generally for machined parts where the oxide surface will be removed. X2.3.2 Hot-Worked-Annealed, (Pickled) Tube - Has the oxide surface removed on both the outside and inside diameters by picking. Surface may be spot ground for removal of minor surface imperfections at the manufacturer's opion. X2.3.3 Hot-Worked-Annealed (Machined Outside and Inside Diameters) Tubes - The outside and inside diameter surfaces are machined to specified dimensions. Minor surface imperfections may be spot ground for removal, at the manufacturer's option. |
| Grade | Mfg. Process | Chemical composition(%) | ||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Others | ||
| N08825 | S | 0.05Max | 0.5Max | 1.0Max | - | 0.03Max | 38.0~46.0 | 19.5~23.5 | 2.5~3.5 | Fe 22.0Min Cu 1.5~3.0 Al 0.2Max Ti 0.6~1.2 |
| N08821 | S | 0.25Max | 0.5Max | 1.0Max | - | 0.03Max | 38.0~46.0 | 20.0~22.0 | 5.0~6.5 | Fe 22.0Min Cu 1.5~3.0 Al 0.2Max Ti 0.6~1.2 |
| Grade | Mfg. Process | Chemical composition(%) | ||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Others | ||
| N08800 | S | 0.10Max | 0.015Max | 1.5Max | - | 0.015Max | 30.0~35.0 | 19.0~23.0 | Fe 39.5Min | AL 0.15~0.60 Ti 0.15~0.60 |
| N08810 | S | 0.05~0.10 | 0.015Max | 1.5Max | - | 0.015Max | 30.0~35.0 | 19.0~23.0 | Fe 39.5Min | AL 0.15~0.60 Ti 0.15~0.60 |
| N08811 | S | 0.06~0.10 | 0.015Max | 1.5Max | - | 0.015Max | 30.0~35.0 | 19.0~23.0 | Fe 39.5Min | AL 0.15~0.60 Ti 0.15~0.60 |
| Grade | Tensile Test MPa or N/mm2 | Remaks (Similar to JIS) | Possibility Temperature | |||
| Hot-Worked | Cold-Worked | Hot-Worked | Cold-Worked | |||
| N08800 | 170 | 205 | 450Min | 520Min | (NCF800TP) (NCF800TB) | |
| N08810 | 170 | 450Min | ||||
| N08811 | 170 | 450Min | ||||
ASTM, ASME and API ASTM B423 Pipes and Tubes Value Added Services
Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials
go through strict quality tests before dispatching them to our
clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of
boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce
or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204
3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record,
WPS/PQR
• Form A for the purposes of the Generalized System of Preferences
(GSP)
ASME SB423 Seamless Pipes & Tubes Popular Searches
Incoloy Alloy 825 Seamless Pipe, Incoloy Alloy 825 Seamless Tube, ASTM B423 UNS N08825, ASTM B423 UNS N08825, UNS N08825, UNS N08221, UNS N06845
|
Hot Finished Incoloy Alloy 800ht Pipe , Seamless Welded Pipe ASTM B407B514 B515
1 / 2" - 48” ASTM Incoloy 800ht Pipe , UNS N08811 Welded Seamless Tube Pipe
DIN 1.4958 Alloy 800h Pipe , ASTM B407 Welded Cold Drawn Seamless Tube
Welded 800H Inconel Pipe UNS N08810 High Electrical Conductivity ASTM B407 B514 B515
DIN 1.4876 Alloy 800 Inconel Pipe Welded Seamless ASTM B407 Standard
UNS N08800 Incoloy 800 Pipe , Welded B407 B514 B515 ASTM Seamless Pipe
ASTM B407 Incoloy 800h Pipe , UNS N08810 UNS N08811 Seamless Steel Tube
UNS N06601 Inconel 601 Inconel Pipe , Seamless Heat Exchanger Tubes ASTM B163
ASTM B163 B167 B474 601 Inconel Pipe , Seamless Welded Pipe High Preicision
Alloy 600 Inconel Pipe ASTM B167 UNS N06600 2.4816 Seamless Pipe Tube
