Natural Color Transition Dental Zirconia Block Digital CAD CAM Milling System

Natural Color Transition,No Need Dyeing

zirconia blocksare made of nanometer medical grade zirconia powder. The powder are firstly compacted by cold isostaticpressing with high compressive strength and then pre-sintered to a certain degree to offer good machinability.

Us zirconia blocks can be used to create crowns, bridges, inlays and veneers of fixed partial denture with different translucency levels and colors.

Available in all classic VITA 16 shades (A1 to D4)

Indications For Use
XTCERA SHT Multilayer is intended for the fabrication and preparation of copings, full
anatomical/ full contour crowns, bridges up to three uints, inlays, and onlays for anterior and
posterior restorations.
Note:Directing arrow is marked on the label of multilayer blanks, which points to insical surface.

Chemical Composition

Properties

Operation Guide

1). Place zirconia block in your CAD/CAM machine and machine it following the manufacturer’s instructions.

2). After machining is completed, remove the zirconia block from the CAD/CAM machine first. Then remove the framework from the zirconia block with a diamond disc. Subsequently, place the framework on a sintering tray with zirconia beads and put them in the oven for sintering.

3). Program the furnace according to its instruction manual and zirconia block’s sintering chart, and then start sintering.

4). Do not remove the sintered framework until it is fully cooled down. Examine the sintered framework for wall thickness, margin fit and seat fit. If necessary, make minor adjustments with a water cooled diamond tool.

5). Make sure no wall thickness is less than 0.5mm and no connector is thinner than 9mm2.

6). Rinse the sintered framework with water and dry completely. The framework

XiangTong was Founded at Apr.9, 2001 with a 18 years’ experience on the R&D of Zirconia and Auto Equipment, which is now a national high-tech enterprise.

XiangTong has grown into a newly high-tech company concentrating on photo-communication and dentistry. Its Offices including SHENZHEN XIANGTONG CO.,LTD. and Dongguan Xiangtong Photoelectricity Technology Company, with over 1200 employees.

Affiliated to China Aviation Industry Group, which is of 500 subsidiaries, among them 26 are listed, and some 500 thousand workers ranked 143^rd among the world top 500 companies, annual sales pass 60 billion dollars.

At the time being, Xiangtong owns three manufacture centers: Songshanhu Xinhao , Dalingshan, and Shenzhen Marketing center.

In 2017,Xiangtong’s sales amount reach 430 million .Its x-mill 4 axis and 5 axis milling machine has been the sales champion successively within 5 years among other China-made dentistry engraving machines.

SHENZHEN XIANGTONG CO.,LTD. with XTCERA as its brand name, its Zirconia blank has been adopted by more than 1000 labs, and trusted among over 2000 clinics around the world. Every one hour, over 720 units are made by XTCERA Zirconia blank, every year we help more than 6.25 million people finding back their sweet smile.

More than 500 units’ x-mill machines are being supplied around the world annually, total market taking pass 2500 units, until now, we are still the No.1 supplier of dental milling machine in Domestic market, and globally we have been supplying to markets of more than 30 countries and regions.

The best after-sale-service team is always available to offer the highest-quality service,24-hour online.