Name: Lightning Protection 4P AC230V 3 Phase Surge Protection Device
Brand: BRITEC
Price: 1 USD

Product Details
Company Profile

Lightning Protection 4P AC230V 3 Phase Surge Protection Device

20ka-40ka 3 Phase Surge Protector SPD Lightning Arrester AC 320V Lightning Protective

20ka-40ka 3 Phase Surge Protector SPD Lightning Arrester Description:

• BR-40 Series surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 440v IT, TT, TN-C, TN-S, TN-C-S and other power supply system

• Failure indication and centralized remote signalling alarm dry contacts.

• It protect to indirect and direct lightning effect or other transient overvoltage

• High discharge capacity and low residual voltage.

• SPD design according with GB18802.1/IEC61643-1 standard.

• Over-temperature protection.

• Class II / Type 2 AC surge arrester.

• IP20, UL94 V0

20ka-40ka 3 Phase Surge Protector SPD Lightning Arrester Product Details:

	BR-40 150 4P	BR-40 275 4P	BR-40 320 4P	BR-40 385 4P	BR-40 440 4P
SPD classification according to EN61643-11	Type 2	Type 2	Type 2	Type 2	Type 2
SPD classification according to IEC61643-11	Class II	Class II	Class II	Class II	Class II
Max. continuous operating a.c. voltage Uc	150V	275V	320V	385V	440V
Nominal discharge current (8/20us) In	20kA	20kA	20kA	20kA	20kA
Max. discharge current(8/20μs) Imax	40kA	40kA	40kA	40kA	40kA
Voltage protection level Up	≤0.8kV	≤1.3kV	≤1.5kV	≤1.8kV	≤2.0kV
Voltage protection level 5kA Up	≤0.6kV	≤1kV	≤1.2kV	≤1.4kV	≤1.6kV
Max. backup fuse	125A gG	125A gG	125A gG	125A gG	125A gG
Response time tA	≤25ns	≤25ns	≤25ns	≤25ns	≤25ns
Operating temperature range Tu	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃
Operating state / fault indication	green / red	green / red	green / red	green / red	green / red
Cross-section area (Min.)	4mm²	4mm²	4mm²	4mm²	4mm²
Cross-section area (Max.)	35mm²	35mm²	35mm²	35mm²	35mm²
For mounting on	35mm Din rail
Enclosure material	Thermoplastic UL94-V0
Degree of protection	IP20	IP20	IP20	IP20	IP20

Dimension:

20ka-40ka 3 Phase Surge Protector SPD Lightning Arrester Feature:

- Consisting of a base part and 4 MOV plug-in protection modules.

- Protects electronics from damage or destruction due to overvoltages.

- For using in the lightning protection zones concept at boundary 1-2.

- Supplied with replaceable cartridges.

- The core parts are metal oxide varistor components with high discharge capacity.

- DIN Rail Mounted Fitting

- Low residual voltage and quick response.

- Modular SPD

- Reliable control.

- Special design for saving installation space--- width 18mm/pole.

- With remote signaling contact for control device.

- High discharge current --- Imax 40kA per pole.

- Fault indication via red mark in the inspection window.

- Double thermal disconnection devices, providing more reliable protection

- Protection mode: L1, L2, L3-PE, N-PE

20ka-40ka 3 Phase Surge Protector SPD Lightning Arrester Applicable Scope:

1: BR-40 series SPD is suitably used in the TT, TN-S, TN-C, IT, TN-C-S and etc. power supply system of AC 50/60HZ.

2: AC power line of house, bank, and telecom tower and so on.

3: Suitable for system power protection, such as power distribution cabinet, switch cabinet, switch cabinet, AC distribution board, etc.

4: Applied in modular SPD Class II (Class C) for power supply system.

5: BR-40 SPD to protect from direct and indirect lightning impulse and other transient over voltage.

6: Distribution box with outdoor input in the building and each floor

Our Services:

• 21 years global leading profession manufacture of electrical products surge arrester

• All products will be well packed before shipping

• Standard packaging, and you can also tell us your own requirements on packaging

• Faster delivery

• Individually Tested Prior to Shipment

Installation:

• The type 2 arresters must install into sub-distribution boards after main distribution boards containing type 1 arresters.

• For proper operation between type 1 and type 2 arresters at least 10- 15 m cable or wire must be otherwise a decoupling coil have to install between the two devices.

• In areas where storms are frequent, it is strongly recommended to install additional protection systems.

Certificate:

Company profile:

Wenzhou Britec Electric Co., Ltd is a manufacturer and trading company located in Yueqing city, Zhejiang province, we have more than 21 years experiences in SPD producing. Our factory is equipped with advanced machinery, also we created much experience in new product development, so can customize products per your requirements. We know that cooperation, support and service is most important and hence employed experienced and customer friendly sales, this ensures a good understanding of your requirements, on time delivery and ultimately a satisfied customer base. We are not just thriving, but growing day by day, we always provide our customers with highly quality products in affordable cost; we sincerely hope to have you as our esteemed customer and friend.

Laboratory equipment:

Shipping:

FAQ:

1. How can I get a quotation?

--Kindly provide us your details request, leave us an inquiry or email and we will response promptly!

2. How to pay for order?

--T/T, Paypal, L/C, ect.

3. How can I trust you and your company?

--We are focusing on the long term relationship with customers, we have worked with thousands of customers since company built 21 years ago, customers always make highly complimentary remarks

4. What’s the process of order?

--Send us Inquiry→get quotation→payment done→mass production.

5. When can I expect the customized product to be finished?

--Sample: 7-10 working days (Standard).

--Bulk order: 15-30 working days (Standard).

6. Delivery & Shipment

--Air shipping, Couirer (DHL, UPS, FEDEX, TNT, EMS, ect ), Sea shipment(FCL/LCL).

Product Tags:


*From:	Your email address is incorrect!
*To:	Britec Electric Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Surge Protection Device
Brand Name:	BRITEC
Model Number:	BR-40 4P
Certification:	TUV
Place of Origin:	China
MOQ:	200 piece / pieces
Payment Terms:	T/T
Supply Ability:	50000 pieces per month
Delivery Time:	15-30 days after payment
Packaging Details:	EXPORT PACKING
Item:	Surge arrester
Test standards:	IEC 61643-11 / EN61643-11
Uc:	150V / 275V / 320V / 385V / 440V
In:	20kA
Imax:	40kA
Poles number:	4P
Mounting on:	35mm Din rail
IP degred:	IP20

Lightning Protection 4P AC230V 3 Phase Surge Protection Device

Lightning Protection 4P AC230V 3 Phase Surge Protection Device

Lightning Protection 4P AC230V 3 Phase Surge Protection Device

4P 3 phase surge protection device

AC230V 3 phase surge protector

AC230V three phase surge protector

Lightning Protection 4P AC230V 3 Phase Surge Protection Device