Automatic Screw Feeding Machine With Electric Screwdriver Air Blow Feeding Screws

Intro:

1. Applicable screw range: M2-M6.
2. The screw head patterns used are: flat, cross, triangle, plum blossom, hexagon socket, H head, etc.
3. The surface treatment methods of screws used are: electric nickel, black pot, color zinc plating, white zinc plating, copper plating, etc.
4. The screw materials used are iron, copper, stainless steel, etc.
5. The material of the lock screw product: plastic, iron, aluminum, etc.
6. Hand-held lock screw machines are widely used in various industries, such as mobile phones, hard disks, keyboards, gaming
Assemble in electronic processing plants such as tools, LCD/LED modules, communication equipment, electrical appliances, toys, and auto parts.

Suitable:

Screw requirement for Low cost Automatic Screw Feeder With Screwdriver Set:

1. b>=1.3* D
2. Screws should be M2 to M6. 2mm<=d<=6mm
3. 3.5mm<=D<=11mm (D can be Max20mm. It should be better within 3.5-11mm.

Specification:

Low cost Automatic Screw Feeder With Screwdriver Set

Features:

1. Convenient, one hand can be freed to support the product to be locked when screwing, and a positioning jig can be saved for small products
2. Fast, because it completely eliminates hand movement, grabbing screws, moving, screw aligning with the screwdriver and other actions, there is no waiting time at all, just align the screw holes and lock the screws.
3. Clean, because the action of removing the screw by hand is omitted, it will not cause secondary pollution to the product due to the stain produced when removing the screw by hand, and the screw will be stained by sweat and make it more rusty.

Working conditions:

1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.

If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.

The screw length should be less than 45mm.

Welcome to contact our automatic screw feeding machine

RKENS TECHNOLOGY CO., LTD was founded in 2007. RKENS is the fast growing manufacturer of various equipment, such as SMD counter, Automatic Tube/Tape/Wire Cutting machine, Axial lead forming machine, Radial lead cutting forming machine, wire cutting stripping machine, wire crimping machine, Label machines, PCB depaneling Machines,etc. Our continuing expansion of manufacturing facilities worldwide provides immediate availability of our products and technical support to meet the needs of our customers. Today, RKENS is an international supplier of high quality equipment. We pledge to continue to provide customers with the good quality and service in the 21st century.

It has the professional research team, sales and production team. Also it is equipped with advanced production and testing equipment system. With the philosophy that qulity is the soul of an enterprise, we pay much attention to product quality, and strictly manage every process, like raw material purchasing , parts prodution, installation, QC, sales and after-sales service, etc. Because of all our effort and good quality, our products have got good comments from customers around the wolrd, such as customers from USA, Europe and Asia, etc.

In the following years,we will devote ourselves to better product and better service to serve our old and new customers. Also we will be open to all our customers and appreciate all feedbacks and advice.

Technical Support & Services

RKENS product management group provides technical assistance on the products being used.
You can contact us by phone, fax, E-mail or this website. We guarantee you our prompt attention.