1 SFP Port Industrial Network Switch 6 Port With EMC Grade Requirements

6 Port Industrial Ethernet Switch 10/100Mbps With One SFP Port

Introduction of 6 Port Industrial Ethernet Switch

IM-FS160FE is the 10/100 Mbps industrial fiber switch, operating temperature -40 ℃ to + 75 ℃, support wide voltage dual power input, meet IP44 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features of 6 Port Industrial Ethernet Switch

1. 6 x 10/100Mbps Auto-sensing RJ45 ports
2. 1 x 100Mbps fixed fiber port
3. LEDs: Power, network, fiber
4. 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
5. Support Auto MDI/MDIX
6. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
7. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
8. A store-and-forward switching mechanism
9. Operating temperature:-40 ° ~75 ° c

10. Storage temperature:-40°～ 85°C

11. Working humidity:10%～90%,non-condensing

12. Storage humidity:10%～95%,non-condensing

13. Transmission mode: storage and forward

14. System bandwidth:40Gbps (non-traffic jam)

15. 10BASE-T: CAT3, CAT4, CAT5 unshielded twisted pair(≤100m)

16. 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m)

17. Transmission distance: 20Km,40Km,60Km,80Km,100Km

Specification of 6 Port Industrial Ethernet Switch

Lead Time of 6 Port Industrial Ethernet Switch

Packaging Details of 6 Port Industrial Ethernet Switch

1. One product, one user manual, and one warranty card are inside one box.
2. 20pcs boxes are in one carton (67*33*47cm)

Application of 6 Port Industrial Ethernet Switch

Photo of 6 Port Industrial Ethernet Switch

Q&A of 6 Port Industrial Ethernet Switch

1. What is the power input?

A: For non-PoE managed switches, it receives DC12V~57V, for PoE managed switches, it receives DC48V~57V.

All the models support redundant input.

2. What is the PoE budget?

A: The standard PoE output is 30W per port.

Take IM-FP288GW for example, it has 8 PoE ports, so the budget is 30W/port*8 ports=240W.

We can also support 60W output if it is required, please confirm with us.

3. How can I install the device?

A: Each model in this series supports DIN35/Wall mounting.

It requires necessary accessories in installation like screws, mounting kit etc., some of them are included in the packing box, some are not.

4. Does your switch support 155Mb/s tranceivers?

A: Yes, the optical speed is 100M/1000M/2500M. Please just configure 100M speed in the management interface, megabit modules are working.