Single Stage Silicon Steel Toroidal Core High Voltage 2000A Dc Current Transformer

CT Power Supply Current Transformer For Power System High Voltage Power

The ct power acquisition device is a new type of power supply device that uses the principle of electromagnetic induction to acquire electric energy and realizes a stable voltage output. The device has long-term stable and reliable operation, mature technology, strong adaptability to changes in the current of the transmission line, self-protection of short-circuit and inrush current, and can provide reliable power for various transmission line online monitoring and monitoring equipment.

1. The principle of CT power supply

CT power supply, that is, use the CT installed on the power line as a device to obtain power. The power supply is divided into two parts, one is the CT used to obtain electricity, and the other is to convert the electrical energy obtained by the CT into the required DC voltage and current power supply module.

Application range:

1. Mainly used in high-voltage cable transmission, where low-voltage AC power and DC power cannot be obtained. Work site
2. The high-voltage cable must have an environment that provides CT energy
3. Overhead cables, underground branch cables, branch boxes, etc. are all suitable for CT energy extraction (three-core cables cannot extract energy)
4. The energy extraction of the CT power extraction device depends on the primary current of the high-voltage cable. If the energy extraction device can meet the load equipment, the energy extraction equipment can be customized or multiple CTs can be used in parallel to increase the power extraction capacity.
5. The high-voltage line and the power failure or the serious lack of current make the back-end loaded equipment unable to work normally. The CT power taking device wakes up the super capacitor and switches instantly, and the super capacitor continues to supply energy to the loaded equipment to ensure that the power is cut off and the current is insufficient. Can continue to work under the circumstances.
6. The specific performance parameters of the CT power take-off device need to be customized according to the actual situation of the project.

Feature:

1. Reasonably select the induction power supply and its energy storage components according to the conventional operating value of the wire current, power curve and electric power;

2. Due to the magnetic circuit, there will be a slight ticking sound when the energy transformer is working, which is a normal phenomenon;

3. The principle of the induction power supply module is completely different from that of the conventional power supply, and it must not be connected to other power interfaces;

Parameter:

diagram

HEMEI is a leading manufacturer of electromagnetic signal coupling, the domestic designer and manufacturer of magnetoelectric power conversion technology, has been committed to promoting the progress of signal coupling technology and passive power technology. The main products are magnetic coupling amplifiers, wave traps, power carrier signal coupling transformers, permalloy cores, electromagnetic loop coils, CT power supply, open and close current transformers and other products. Products are widely used in smart home appliances, energy management systems, smart meter reading systems, smart monitoring equipment, smart distribution equipment, etc. We are the supplier of Qualcomm, Huawei Hisilicon, ST Microelectronics, In addition, Permalloy and electromagnetic core products have the largest market share in the power distribution industry of the State Grid.

This power suply CT device is our newly developed product, which can used on 100V-220kv AC transmission line, the new product can be used as a continuously and stabely power supply device. Hemei also offer customers personal services contains OEM, ODM and OPM. We welcome sample order to test and check quality.