Sign In | Join Free | My ecer.jp |
|
Categories | Pleated Depth Filter |
---|---|
Brand Name: | RS |
Model Number: | ZDL |
Place of Origin: | China |
MOQ: | 10 |
Payment Terms: | L/C, T/T, D/A, D/P |
Delivery Time: | 5-8 work days |
Packaging Details: | One piece in a plastic bag,then in a carton(according to the size of the products) ,or According to customers' requirement |
Filter Media: | Polypropylene,PET,Glass fiber |
Support Layers: | Polypropylene |
Outer cage, End Cap: | Polypropylene |
Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 2.0,3.0,5.0,10, 30, 40, 50, 70, 100 um |
Outer Diameter: | Φ 69 mm(2.75'') |
Inner diameter: | Φ 33 mm(1.30'') |
Length(based on DOE end cap): | 10'', 20'', 30'', 40'' |
Seal Method: | Thermal Bonding, No Adhesives |
O-rings/ Gaskets: | Silicone/EPDM/Viton/PTFE/Nitrile |
Normal Flow Direction pressure: | 4.2 bar (60.9 psi) at 25℃ (77℉ ) |
Reverse Flow Direction pressure: | 2.1 bar (30.5 psi) at 25℃ (77℉ ) |
Microporous pleated filter element, the main filter material is :
Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether
sulfone, Nylon, etc.
Pleated filter element is a kind of deep filtration filter,it is
usuaslly used as liquid overheating,clarification, filtration and
terminal filter.
It has the following characteristics: the superfine polypropylene
fiber membrane as the filtration medium, low pressure differential,
high flux, good filtration precision, lower economic cost.
The whole structure of polypropylene, end cover, housing and center
pole adopts polypropylene material; It adopts the hot melt welding
process, PP and PP melt bonding,without any binder.
It has wide range of chemical compatibility, and also has a series
of pore size and form a variety of interface.Material: Pleated
filter, Support layer, End-cover, Inside & Outside cylinder are
polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no
foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics,
Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High
interception rate, high liquidity, low pressure differential and a
wide range of chemical compatibility.
The production process adopts unique hot melting process technology, no any adhesive, no foreign body release.
1. Possessing better performance of high temperture-resistance,
acid and base resistance
2. Hydrophillic membrane with high flow
3. Non-fiber releasing according to pharmaceutics and food industry
requirements
4. 100% integrity tested
5. Flushed with ultrapure water
1.Machine tool lubrication
2.detergents
3.process
4.waste water 5.Reverse osmosis (RO) protection
6.pre-filtration 7.Solvent
8.bulk chemical
9.process filtration
It can meet the food,beverage, beer, chemical, pharmaceutical and other industries production requirements.
![]() |