99.999% High Purity Sputtering Titanium Target Gr1 Experimental Elemental Titanium

Titanium target 99.999% high-purity sputtering target experimental elemental titanium

Customized Titanium Target Titanium Round Target

Usually we will provide a quality inspection report like this with the goods,

which shows the chemical composition and physical properties

Titanium square target, titanium round target, titanium special shape target

Purity is one of the target performance indicators.

The purity of the target material has a great effect on the performance of the film.

Main performance requirements for targets:

Purity

Purity of the target is one of the main performance indicators of the target because the purity of the target greatly affects the performance of the film. However, in actual applications, the requirements for purity of the target material are not the same. For example, with the rapid development of the microelectronics industry The size of the silicon wafer was expanded from 6 ", 8" to 12 ", the wiring width was reduced from 0.5 um to 0.25 um, 0.18 um, and 0.13 um. Previously, the target purity was 99.995%.

Impurity content

The main source of the deposited film is the oxygen and moisture of the target solids and pores. Targets for various applications have different requirements for different impurity levels. For example, targets of pure aluminum and aluminum alloys used in the semiconductor industry have special requirements for alkali metal content and radioactive element content.

Density

In order to reduce the pores of the target solids and improve the performance of sputtered films, the targets typically need to be more densely. The target density affects not only the sputtering rate but also the electrical and optical properties of the film. The higher the target density, the better the film performance. In addition, when the target density and intensity are raised, the target can withstand the thermal stress during sputtering. Density is one of the target performance indicators.

Grain size and size distribution

Usually the target is polycrystalline, and the particle size may be in the order of micrometers to millimeter. In the case of the same target, the sputtering rate of the fine-grained target is faster than the sputtering rate of the coarse grained target, while sputter deposition of the smaller particle size (uniform distribution) target has a uniform thickness distribution (uniform). Distribution.

Baoji Quality Metals Co., Ltd. is located in Baoji China, which is engaged in the production of titanium machining products, titanium sputtering target, and some metal material machining. Our company has strong technical force, advanced and sophisticated equipment, mature production technology and perfect quality assurance systems. You can customize the titanium products as you want, we are good at process titanium according sample or drawing. Welcome OEM and ODM cooperation. Our products are widely used in aviation, aerospace, metallurgy, military, petrochemical industry, medical, horologe, golf apparatus etc. The sales and service network has covered in domestic and oversea market.