Polished Mirror Aluminum Alloy Coil For Industry Decoration
Product specification
Product | Aluminum Coil |
Grade | 1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series |
Temper | O-H112,T3-T8,T351-T851 |
Thickness | 0.2-6.5mm |
Width | 2mm-2600mm |
Length | Acc requirements |
Application | Industry, Decoration, Building, Packing, Pressing, Etc. |
Surface treatment | Mill Finish, Coated, Powder Coated, Anodized, Polished mirror, Embossed, Etc. |
Coil ID | Acc requirements |
Tolerances | Acc requirements |
Application | 1) Other production tools. |
2) Solar reflective film |
3) The appearance of the building |
4) Interior decoration: ceiling, wall, etc. |
5) Furniture cabinet |
6) Elevator decoration |
7) Signs, nameplates, bag making. |
8) Car interior and exterior decoration |
9) HouseholDappliances: refrigerators, microwave ovens, audio equipment, etc. |
10) Consumer electronic products: mobile phones, digital |
cameras, MP3, U disk, etc. |
Chemical composition :
Grade | SI | FE | CU | MN | MG | CR | NI | ZN | AL |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | | | 0.05 | 99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | | | 0.05 | 99.6 |
1070 | 0.2 | 0.25 | 0.04 | 0.Q3 | 0.03 | | | 0.04 | 99.7 |
1100 | Si+Fe:0.95 | | 0.05-0.2 | 0.05 | | | 0.1 | | 99 |
1200 | Si+Fe:1.00 | | 0.05 | 0.05 | | | 0.1 | 0.05 | 99 |
1235 | Si+Fe:0.65 | | 0.05 | 0.05 | 0.05 | | 0.1 | 0.06 | 99.35 |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | | | | 0.1 | remains |
3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | | | 0.25 | remains |
3005 | 0.6 | 0.7 | 0.25 | 1.0-1.5 | 0.20-0.6 | 0.1 | | 0.25 | remains |
3105 | 0.6 | 0.7 | 0.3 | 0.30-0.8 | 0.20-0.8 | 0.2 | | 0.4 | remains |
3A21 | 0.6 | [0.7 | 0.2 | .0-1.6 | 0.05 | | | 0.1 | remains |
5005 | 0.3 | [0.7 | 0.2 | 0.2 | 0.50-1.1 | 0.1 | | 0.25 | remains |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | | 0.1 | remains |
5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | | 0.25 | remains |
5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1 -3.9 | 0.15-0.35 | | 0.2 | remains |
5182 | 0.2 | 0.35 | 0.15 | 0.20-0.50 | 4.0-5.0 | o.i | | 0.25 | remains |
5251 | 0.4 | 0.5 | 0.15 | 0.1-Q.5 | 1.7-2.4 | 0.15 | | 0.15 | remains |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | | 0.2 | remains |
Wuxi Benchmark Special Steel Co.,Ltd
Wuxi Benchmark Special Steel Co.,LTD was founded in 2003, located
in Wuxi, Jiangsu—one of the biggest south stainless steel markets
in China. It is very close to Shanghai Port, where is much
convenient in land, sea and air.
Our firm engaged in kinds of stainless steel, steel, aluminum and
galvanized materials ,including coil ,tube ,plate ,sheet, pipe and
rod. The main grades are 201,301,304,304(L), 316(L),309(S),310(S),
321,430. To fulfill various demands, we also provide different
surfaces:NO.1,2B,BA,NO,4,HL,8K,checkered,colours.