Grey Chrome Car Vinyl Wrap Film Protect Paint Against Fading Scratches And Chips

Grey Chrome Car Wrap Film And Protect The Paint Against Fading, Scratches, And Chips
Product Name: Bubble Free 60µM Grey Chrome Car Vinyl Wrap UV Resistant For Exterior Interior

Product Description:

1. Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments.
2. 【Premium Material】The vinyl wrap is made of high-quality vinyl for wrapping vehicles and many other uses such as cars, boats, bikes, interior & exterior applications and decorations, computer, laptop, and any gloss smooth surfaces. The vinyl material is easy to clean and maintain.
3. 【Air-Release Technology】The automotive vinyl wrap has air release channels on the back of the vinyl in the adhesive to prevent bubbles. Premium vehicle warp vinyl are bubble free and wrinkle free.
4. 【Protect Painted Surfaces】Changes your vehicle a different look and protect the paint against fading, scratches, and chips. Vinyl car wraps are more durable and flexible than paint. Vinyls are harder to scratch and easy to replace.

Product Application:

1. Trailers
2. Trucks
3. Cars & Vans
4. Buses

Product Specfications:

Product Features:

1. Excellent conformability around curves and recesses
2. Easy apply feature helps eliminate wrinkles and bubbles during application
3. Combines a colored film and protective layer in one convenient construction with fewer seam
4. Unique patented adhesive technology
5. Very high gloss semi-conformable film
6. Outstanding durability and outdoor performance
7. Exceptional durability and performance

Advantages of Applying Car Wrap Film:

1. Safe to use on any paint. The type of adhesive that works with vinyl wraps is heat- (or pressure-) activated. It enables you to slide it into position during installation. The glue is gentle on your car’s surface, even after it dries. Vinyl wraps are easy to remove and won’t harm your car’s paint. They are, however, single-use items. Once removed, you can’t reapply it.
2. Professional results. Unlike many vehicular accessories, this is something even an experienced DIYer can take on. Car vinyl wraps are made to be user-friendly and intuitive, with the material responding to heat and doing a lot of the work for you. Provided you take your time during setup, it’s shocking how smooth and stylish a newly-wrapped car can be.
3. Affordable improvement. Getting your own car vinyl wrap can save you some expensive shop time. Though the project isn’t complex, it is time-consuming, and anyone who’s been to a mechanic knows that those hours can add up. Thankfully, vinyl wraps are easy to get in place, have evolved a lot since Milton Hershey invented them in 1900.
4. Useful on exterior and interior. When you think of car vinyl wrap, you might think of a complete exterior overhaul. But vinyl has applications inside your car as well. If you cut it to size and pick a suitable color, it can really jazz up your dashboard, accent your radio, or make your doors more stylish. Yes, vinyl wraps are functional, but they also lend themselves to artistic applications.
5. Customize your car’s look. A vinyl wrap is a whole lot more affordable and much more noticeable than opting for a spoiler or a new set of rims, creating lasting, impactful changes of your vehicle’s look. You can get wraps in any color, letting you completely overhaul your car’s appearance without making any mechanical modifications.

FAQs:

B. Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

C.Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

D. How to remove vinyl from your car?

1.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

2. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

3. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

Based in Guangzhou City, China, Guangzhou City Shenghui Optical Technology Co., Ltd is a professional adhesive coating manufacturing company since 2002. We manufacture premium vinyl graphic films, digital media, laminating films, and reflective products used in signage, graphics, digital printing, screen printing, and traffic and safety applications. Additional Guangzhou ShengHui Optical markets a wide range of industrial tapes for applications ranging from the solar industry to point of purchase applications. The company’s distribution network spans the United States, Canada, Latin America, and the Caribbean.

Guangzhou City Shenghui Optical Technology Co., Ltd is one of the most modern of its kind in China and ensures both high-quality products and rapid turn-over time for delivery. This facility completed an expansion in 2006 that included approximately 160,000 square meters of additional storage space for finished goods, and close to 50,000 square meters of ground-floor space for packaging and shipping. In addition to the plant expansion, capital investment in an adhesive coating line and automated roll retrieval system brought the total capital investment project to RMB 20 million.