ASTM A312 / SA312 TP321 Stainless Seamless Pipe Plain End Pickled And Annealed

ASTM A312 / SA312 TP321 Stainless Seamless Pipe Plain End Pickled And Annealed

YUHONG GROUP deal with stainless steel seamless pipe and tube already more than 33 years, every year sell more than 80000 tons of stainless steel seamless pipe and tube. Our client already cover more than 65 countries. Our stainless steel seamless pipe and tube was width used in Mining, Energy, Petrochemical, Chemical Industry, Food plant, Paper plant, Gas and Fluid Industry etc.

Description

Alloy 321 Tube is a versatile grade of austenitic stainless steel. Also referred to as by its trade name UNS S32100, stainless steel grade ASTM A312 Tp321 is a titanium stabilized alloy. . The 321 stainless steel tube is stabilized by titanium with a chemical composition of 17 to 19 percent chromium and 9 to 12 percent nickel. These pipes exhibit enhanced corrosion and oxidation resistance in stress-induced environments. 321 SS tubes are insensitive to intergranular corrosion when heated in the carbide precipitation range of 425 to 850 degrees Celsius. These pipes are a good choice for applications where temperatures are around 900 degrees Celsius. 1.4541 Pipelines incorporate high strength and water resistant corrosive media. The minimum tensile strength of the pipeline is 515mpa and the minimum yield strength is 205mpa. These pipes can easily stretch by 40 percent. 321 stainless steel tube has a density of 8.0kg /cm3 and a hardness of 217max Brinell. The tubes can be solution treated or annealed by heating at temperatures ranging from 950 °C to 1120°C followed by rapid cooling, thereby improving their strength and corrosion resistance.

Chemical Composition of ASTM A312 TP321 Stainless Steel Seamless Pipes

Mechanical Properties of ASTM A312 TP321 Stainless Steel Seamless Pipes

ASTM A312 TP321 Stainless Steel Seamless Pipes Physical Properties

grade Specification Comparison for ASTM A312 TP321 Stainless Steel Seamless Pipes

Apllication

Food preparation equipment particularly in chloride environments.

Laboratory benches & equipment.

Coastal architectural panelling, railings & trim.

Boat fittings.

Chemical containers, including for transport.

Heat Exchangers.

Woven or welded screens for mining, quarrying & water filtration.

Threaded fasteners.

Springs.