38kw Hospital Operation Room EPS Cleanroom Wall Panel Machine

Hospital Operation Room Panel Line

General specification:

Steel sheet thickness: 0.3-0.6mm

Steel sheet width: ≦1260mm

Core material: EPS panel

Working speed: 2-6m/ min

Power: 38kw

Production Dimension: 32m*2.3m*2.8m

Product thickness: 30-200mm

Annual output: 600,000 m2

Parts Listing:

The Sandwich Panel Production Line is composed of four (5) main sections, such as, STEEL DECOILER, EPS LOADER AND EDGE MILLING MACHINE, STEEL LOCK FORMING MACHINE,SANDWICH PANEL LAMINATOR, CIRCULAR SAW PANEL CUTTER ,ROLLING TABLE.

The production line is 26000mm x 4000mm x 2350mm.

III . THE MAIN PARTS OF THE PRODUCTION LINE:

1. STEEL DECOILER: 2Pcs.

Type of Decoiler: Manual Expansion

Width of coil: ≤ 1250mm

Weight of coil: ≤ 5 mt

2. EPS LOADER AND EDGE MILLING MACHINE: 1Pcs.

Type of milling: Milling round knife

Numbers of miller: Left and right two piece

Driving Motor Power: 0.75 Kw x 2

3. STEEL SQUARE LOCK FORMING MACHINE(Top and bottom): 1Pcs.

Roller station: 8 stands

Roller material: GCr15 Alloy

Width adjusting range: 900-1250mm

Driving and Transmission: Gear and K type Gear motor

Cross moving guide: Linear bearing

4. SANDWICH PANEL LAMINATOR: 1Pcs.

4.1 LAMINATING ROLLER:

Rubber roller Diameter: 150mm

Thickness of composite rubber layer: 10mm

Number of rollers: 16 pairs

4.2 GLUE SPRAYING DEVICE:

Number of pump: 4 sets (top & bottom each 2)

Required Power: 0.37 Kw

Flow volume of glue: 0 – 0.4 kg per pump

Type of flow volume control: Frequency inverter

Scale of glue: (white) 1: (brown) 1

Spraying pipe: Plastic spraying nozzle

4.3 GLUE UNIFORMITY DEVICE: Speed of spreading: 80 times/min.

Required Power: 0.5Kw x 3

4.4 PLASTIC FILM COATING DEVICE: Conical push pin by wheel adjusting

4.5 DUST SUCTION FOR EPS WASTE:

Type of suction: Blowing fan

Required Power: 2.2 Kw

5. CIRCULAR SAW PANEL CUTTER: 1Pcs

Type of Cutting Circular Saw and rotating blade

Required Power 1.5 Kw x 2

Thickness of Panel 40mm – 200mm

Length of Panel 1200mm – 30000mm

Movement of Cutter: 2000mm (cylinder distance)

Type of operating: Touch screen and PLC

Overall weight of cutter 2.5 mt

Zhangcheng machinery manufacture co.,ltd , is a professional and leader of metal sheet forming machinery and different sandwich panel machinery manufacturer. This practical experience of over 18 years has guided our product development toward the best possible cost-efficiency, very high reliability, advance technology application .
We also thoroughly appreciate the importance of quality service and fast response times regarding purchase, delivery and maintenance of production equipment.

We manufacture EPS, PU/ROCK WOOL Sandwich Panel Panel Production Lines since 2002. Z-Lock Panel for container house,cold room.Our factory is located at the jinshan Industrial, As the leading and reliable manufacturer of EPS, Sandwich Panel Machines, we are mainly engaged in the research & development of our products, machine manufacturing, plant designing, and talent training.  With our well organized and perfect customer service network. The Mineral Wool Sandwich Panel Production Line produced by Zhongji has achieved the strip cutting of 250mm thick of high-density mineral wool panel, automatic conveying, flip angle of 90.c , as well as the saw cutting , automatic staking and wrapping of the sandwich panel after production, and can produce different models of wall panels, roof panels, door panels and cold storage panels, etc. As the pioneer and manufacturer of EPS, Sandwich Panel Production Lines, we work hard to improve the quality of our products and services and develop new innovative ideas to keep pace with the current trend in high-end technology in this field; all in the bid to satisfy our valued customers requirements. We warmly welcome friends and all those interested in our products and services to visit our factory in Shanghai, China!