HT8360HC Polyurethane Windshield Adhesive for cars sealing and bonding

Detailed Product Description

soft package polyurethane general sealant, HT8360HC for cars sealing and bonding

Description:

8360HC high performance polyurethane sealant is a single component, W High thixotropy, does not flow, low odor polyurethane adhesive. Product is low viscosity, good thixotropy, which is convenient for manual gluing. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance.

Typical use

Seal bus air conditioning, weld, luggage and other parts. Deal ships, locomotives, construction, paint and other industries and other usage of low bond strength.

Characteristic before curing

Color: White/black/grey/iron grey

Density g/cc: 1.28g/cc

Tack Free Time(min) 45

(23℃/50%RH)

Characteristic after curing

Tensile strength MPa: 1.8

Elongation at break (%): 500

Tear strength KN/m: 8

(GB/T 529)

Harness: ShA: 40

(GB/T 531-1999)

Work Temperature℃: -40～90

Instructions for use

Surface cleaning: clean surface: remove the rust, dirt, water and oil etc...

Gluing:

cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

Curing:

a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

Polyurethane adhesive in gluing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

Storage:

unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.

Package

310ml/Cartridge, 24Cartridges/Carton

600ml/Sausage, 20Sausages/Carton

Storage

Store in cool and dry place 5-25 C (humidity less than 70% RH)

Storage period: Cartridge pack for 9 months

Sausage pack for 6 months

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude