OSFP-800G-DR8 For Use In 800 Gigabit Ethernet Links Over 500m Single Mode Fiber 0 To 500m Over SMF With KP4 FEC

Product Description

This OSFP transceiver module is designed for use in 800 Gigabit Ethernet links over 500m single mode fiber. The module has 8 independent electrical input/output channels operating up to 106.25Gbps per channel. This transceiver consists of two transmitter/receiver units, with each operating on a set of wavelengths on the ITU G.694.2 CWDM at 1310nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with EML laser and 8-channel internal driver. On the receiver path, used 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer.

Features

• 0 to 500m over SMF with KP4 FEC
• supported at the Host side
• 1 Dual MPO-12 connector
• 1 Support multi-rate operation
• 1 EML 1310nm transmitter
• 1 PIN and TIA array on the receiver side
• 1 Power dissipation < 16W
• 1 Case temperature range:0°C to 70°C (commercial)
• Safety Certification: TUV/UL/FDA*1
• 1 RoHS Compliant

APPLICATIONS*1

• 8x100G Ethernet
• 1 2x400G Ethernet
• 1 1x800G Ethernet
• 1 2x200G Ethernet

Ordering information

*1: For more details, please contact with us.

*2: Over G.652 SMF.

*3: CMIS5.0 or later version.

Absolute Maximum Ratings

Exceeding the absolute maximum ratings table may cause permanent damage to the device. This is just an emphasized rating, and does not involve the functional operation of the device that exceeds the specifications of this technical specification under these or other conditions. Long-term operation under absolute maximum ratings will affect the reliability of the device.