1 real two-hybrid grouping mixer with DSP effects;
2 balanced microphone inputs and 2 stereo inputs;
3 high-quality, low-noise microphone input;
4 microphones provide quality 48V phantom power;
5 is equipped with high-grade mixer that has the signal input point
(external signal processor);
6 three-band equalizer frequency sweep, the scope of MF band from
140Hz to 3KHz, English style;
7 two AUX auxiliary output can be selected as pre-fader (foldback)
post-fader (external processor);
8 double-sided circuit boards using SMT technology, stable and
reliable performance;
High degree of travel 9.100MM fader.
Technical specifications:
·-Total harmonic distortion: <-0.005%
· The frequency response: (20Hz-20KHz) +1dB/-3dB
· The residual output noise: <-89dBu
· The crosstalk: <-77dBu
· Mono high pass filter: 80Hz-120Hz 12dB/oct
· The SNR: -76 dB
· The gain control
Mono: -49dB~0dB
Stereo: -24dB~0dB
·-Level output
Group maximum: 17dBm (1 KHz, THD=0.5%)
Listen for maximum output: ≥ 24dBm
·-Level input
Microphone input: ≥ -30dBm
Line input: ≥ -10dBm
· The headphones output power: 250mW (1KHz,THD=0.5%,200 ohm)
· The Mono equalizer
High: 12KHz ± 15dB
: 140Hz~3KHz ± 15dB Q=1.5
Low: 60Hz ± 15dB
· A stereo equalizer
High: 12KHz ± 15dB
Low: 100Hz ± 15dB
· The Equalizer: ± 12dB
· The input and output impedance
Microphone input: adapt to 2.4K ω ω 50-600 impedance MIC
Mono input: adapt to impedance 600 ω 11K ω MIC
Stereo input: adapt to 100 k ω ω 50-600 impedance MIC, Line
Recording input impedance: 0 KΩ adapt to impedance 600ΩLine
Output impedance: 75 ω
Grouping output impedance: 150 ohms
AUX output impedance: 150 ohms
Audio output impedance: 600 ohms
