Water treatment Tri-lobe Roots Blower 1150rpm to 1800rpm / rotary lobe blower

High pressure tri-lobe Roots blower for water treatment 98kpa 90kw Port size 200mm

Specifications:

Description:

The LBSR150A is a standard three-lobe roots blower , its structure is very compact and have higher running reliability and long life, the inlet sizes are from 1.5" to 14". The tri-lobe roots blower can run under the pressure of 80Kpa without cooling water, and the biggest capacity can be 260 m3/min. Our company has also developed LBSRH water-cooling series blower for the pressure between 80Kpa and 100Kpa. So the biggest pressure of two-stage can be 200Kpa. LBSREH-series are also developed for the biggest pressure can be -500mmHg.

1. Wide range for air volume, pressure and vacuum
2. Stable air flow and less pressure variation
3. Clean air and without oil dirt and/or particles
4. Construction simple and easy to maintain
5. Bearings are all lubricated with oil
6. Lower energy consumption.
7. Lower noise
8. Longer bearing life
9. Strict management of quality standards
10. Our three-lobe design controls backflow pressure towards rotor so as to reduce energy consumption.
11. Our new design can effectively reduce noise by approximately 5 dB.
12. Fewer vibrations transmitted through the lobe increases bearing life by approximately 20%. Conventional blowers generate pressure pulses and vibrations which will diminish power and shorten the life of every bearing, gear and other drive train components.​​

Applications:

1. Pneumatic conveying
2. Waste water treatment plants
3. Electroplating tanks
4. Printing
5. Activated sludge systems.
6. Vacuum handling systems.
7. Drying systems.
8. Absorption transporter (for high standards of hygiene)
9. Filters.
10. Hospitals and dentistry

​

​​Typical application field

​Competitive advantage

All our tri-lobe roots blower are built and checked annually following the strictest adhesion to ISO 9001 and CE quality standards, involving the use of our highly precise and regularly maintained CNC machinery. Scrupulous attention is paid to every detail, in a specialized field where technical errors should be kept to a bare minimum.

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.