Product Details
Company Profile

4 Port RFID Application Uhf Long Range Reader / Wireless RFID Reader12 Dbi Antenna

Long Range high speed UHF rfid reader handheld with Four Port and 12 dbi antenna

Product Advantage

Enhanced noise suppression function for reliable data capturing.
High precision return signal strength (RSSI).
Excellent performance of anti-interference and lightning-proof design.
Aluninium alloy enclosure, rugged and durable, remarkable performance of heat dissipation.
Aesthetic appearance, easy to install.
Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field make this module more suitable for harsh application environment.

Remarkable performance, can achieve a reading distance over 8m for single tag reading with 8dbi RF antenna.
Remarkable performance in intensive taps reading can attain a tags identification rate of 400tags/s.
Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider.
Provide four TNC antennae interfaces, users can achieve superior reading performance with less equipment deployment.

Technical parameters

Name	Parameters	Remark
Reader Chip	R2000
Tag Protocol	EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency	840～960MHz
Supporting Working Area	China, Europe, the United States, South Korea, Japan, Taiwan……
Operating Voltage	12V	DC power supply
Maximum operating current	1A	Test of transmit power in 30dBm state
Standby current	≤80mA
RF port maximum output power	1W(30dBm)
Working Temperature	-25℃～+65℃
Working Humidity	≤95%(+25℃)
Storage Temperature	-40℃～+80℃
Receiving	-82dBm
Antenna interface impedance	50Ω
Serial communication parameters	Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1
Power output settings	5～30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm)
DRM mode	support
RSSI	support
High temperature automatic protection function	support
Power supply enable	support
GPIO interface	3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer
buzzer	support
LED lights	Power indicator: Red Status indicator: Green
Communication Interface	USB,RS232,RS485,Ethernet	Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface	Four TNC	The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
dimension	26.525.04.5CM(including bracket)
Accessories	12V/3A Power Adapter:1 Serial line: 1 root

PIN Green Terminal Interface Definition

Pin NO.	Name	Description	Remark
1	485-B	RS485 B
2	485-A	RS485 A
3	EN_OUT	Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V.
4	GPIO1	GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)
5	GPIO2	the same as above
6	GPIO3	the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)
7	NC	Reserved interface, no function
8	NC	Reserved interface, no function
9	WIFI_RESET	Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.
10	GND	Signal reference.

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF
Q4. How about your delivery time?
A: Generally, it will take 3-7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Product Tags:


*From:	Your email address is incorrect!
*To:	SUNSHINE RFID Technology Co.,Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	RFID Application
Brand Name:	sunshine
Model Number:	F5860
Certification:	CE,ROSH
Place of Origin:	CHINA
MOQ:	1
Payment Terms:	T/T, Western Union
Packaging Details:	Carton
Tag Protocol:	EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency:	840～960MHz
Communication Interface:	USB、RS232、RS485、Ethernet
Antenna interface:	Four TNC
GPIO interface:	3-Road GPIO can only input can not be input，GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer
Receiving:	-82dBm
Reader Chip:	R2000