| Sign In | Join Free | My ecer.jp |
|
| Sign In | Join Free | My ecer.jp |
|
| Categories | Vehicle RFID Reader |
|---|---|
| Brand Name: | sunshine |
| Model Number: | F5860 |
| Certification: | CE,ROSH |
| Place of Origin: | CHINA |
| MOQ: | 1 |
| Payment Terms: | T/T, Western Union |
| Packaging Details: | Carton |
| Tag Protocol: | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C |
| Working Frequency: | 840～960MHz |
| Communication Interface: | USB、RS232、RS485、Ethernet |
| Antenna interface: | Four TNC |
| GPIO interface: | 3-Road GPIO can only input can not be input，GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer |
| Standby current: | ≤80mA |
High Performance Imppinj R2000 Chip Long Range Uhf Rfid Reader
840-960mhz
Product Description
F5860H is a four port UHF RFID fixed reader, which embeds the M2240
module. Its communication interfaces can be USB, RS485, RS232, and
100M Ethernet, etc.. It has four TNC antennae interfaces, with a
protection level of IP64. Aluminium alloy of the whole body makes
this reader more rugged and durable as well as the excellent heat
dissipation capability, antijamming capability and lightning-proof
ability.
Technical parameters
| Name | Parameters | Remark |
| Reader Chip | R2000 | |
| Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | |
| Working Frequency | 840～960MHz | |
| Supporting Working Area | China, Europe, the United States, South Korea, Japan, Taiwan…… | |
| Operating Voltage | 12V | DC power supply |
| Maximum operating current | 1A | Test of transmit power in 30dBm state |
| Standby current | ≤80mA | |
| RF port maximum output power | 1W(30dBm) | |
| Working Temperature | -25℃～+65℃ | |
| Working Humidity | ≤95%(+25℃) | |
| Storage Temperature | -40℃～+80℃ | |
| Receiving | -82dBm | |
| Antenna interface impedance | 50Ω | |
| Serial communication parameters | Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1 | |
| Power output settings | 5～30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm) | |
| DRM mode | support | |
| RSSI | support | |
| High temperature automatic protection function | support | |
| Power supply enable | support | |
| GPIO interface | 3-Road GPIO can only input can not be input,GPIO port default is
low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED
state indicator(green) and buzzer | |
| buzzer | support | |
| LED lights | Power indicator: Red | |
| Communication Interface | USB,RS232,RS485,Ethernet | Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time. |
| Antenna interface | Four TNC | The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time. |
| dimension | 26.5*25.0*4.5CM(including bracket) | |
| Accessories | 12V/3A Power Adapter:1 |
PIN Green Terminal Interface Definition
| Pin NO. | Name | Description | Remark |
| 1 | 485-B | RS485 B | |
| 2 | 485-A | RS485 A | |
| 3 | EN_OUT | Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V. | |
| 4 | GPIO1 | GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V) | |
| 5 | GPIO2 | the same as above | |
| 6 | GPIO3 | the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control) | |
| 7 | NC | Reserved interface, no function | |
| 8 | NC | Reserved interface, no function | |
| 9 | WIFI_RESET | Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI. | |
| 10 | GND | Signal reference. |
How to order
Please chat with us through TradeManager or click "contact
supplier" to leave massage about the quantity,special modelyou want
or your requirement. Then we will reply to you ASAP.
After we confirm all detailed information, we Will Make PI
(Performa Invoice) for you to confirm the order if you need.
Payment terms
We accept PayPal, Western Union and Bank transfer.
30% deposit and 70% before shipping.
No payment collection. We only can deliver goods after getting full
payment.
|
12 Dbi For Long Read Distance Vehicle RFID Reader For Vehicle RFID Management System
Multi Function Vehicle RFID Reader Multi Tag 840～960MHz Working Frequency
Professional Four Port RFID Reader Long Range For RFID Race Timing System
Android Bluetooth RFID Reader Module With WIFI / 4G / Bluetooth / GPS
Integrated RFID Reader Desktop , USB UHF Rfid Reader Writer With Free SDK / API
High Performance Single Port UHF Vehicle RFID Reader Module Impinj R2000 Chip
IP64 Vehicle RFID Reader Industrial WINCE Touch Screen OEM / ODM Available
Outdoor RFID Reader Tablet RFID Reader Writer Programming With 2GB RAM
Rfid Vehicle Tracking System Vehicle RFID Reader For Product Counterfeit Inspection
Ultra High Frequency Vehicle RFID Reader For RFID Based Vehicle Access Control System
