Neutral Salt Spray Testing Chamber For Corrosion Resistance Of Coating Electronics

Corrosion Resistance of Coating Electronics Neutral Salt
Spray Testing Chamber

Brief Introduction:

SO2 Salt Spray Test (cyclic) can be used to test the relative resistance to corrosion of product samples that are likely to encounter a combined SO2(sulfur dioxide)/salt spray/acid rain environment during their usual service life. Test specimens are placed in an enclosed chamber, and exposed to 1 of 2 possible changing climate cycles. In either case, the exposure to salt spray may be salt water spray or synthetic sea water prepared in accordance with the requirements of the test standard. The most appropriate test cycle and spray solutions are to be agreed between parties.

The first climate cycle comprises a continuous indirect spray of neutral (pH 6.5 to 7.2) salt water/synthetic seawater solution, which falls-out on to the specimens at a rate of 1.0 to 2.0ml/80 cm²/hour. During this spraying, the chamber is dosed with SO2 gas at a rate of 35 cm³/minute/m³ of chamber volume, for 1 hour in every 6 hours of spraying. The entire test cycle is at a constant chamber temperature of +35C. The number of cycle repeats and therefore the test duration is variable.

The second climate cycle comprises 0.5 hours of continuous indirect spray of neutral (pH 6.5 to 7.2) salt water/synthetic seawater solution, which falls-out on to the specimens at a rate of 1.0 to 2.0ml/80 cm²/hour. This is followed by 0.5 hours of dosing with SO2 gas at a rate of 35 cm³/minute/m³ of chamber volume. This is followed by 2.0 hours of high humidity soak. The entire test cycle is at a constant chamber temperature of +35C. The number of cycle repeats and therefore the test duration is variable.

Features:

1, Chamber material is made of P.V.C Sheet, sturdily and will not be out of shape.

2, Test chamber is heated from five directions to ensure the temperature is uniformity distributed.

3, Spray nozzle is specially made, enable to spray the salt water with considerable speed, then falls on the surface of samples.

4, Hot and moist air keeps the humidity in the test chamber conforms testing request.

5, High precision P.I.D. temperature controller limits the temperature difference within the range of ±0.1℃.

Technical Specifications:

Please Note Small Type of 60 and 90 do not meet standard of ASTM B117.

Note:

1. The above specifications are for reference only, the actual specifications for the main quotation.

2. Custom made is available according to customers’ special requirements.

DongGuan Q1-Test Equipment Co., Ltd. was founded in year 2000, located in DongGuan, a famous industrial city.
 

Mainly specialized in manufacturing, developing and marketing various environmental testing equipment like programmable temperature and humidity test chamber QTH series, walk-in temperature and humidity test chamber, thermal shock test chamber QT3 series, industrial drying oven, burn-in chamber, salt spray/corrosion test chamber QCC series.
 

All the Q1-Test products conform the standards of GB, BS, IEC, CNS, ASTM, ISO, JIS, DIN and other relevant international testing standards.
 

Q1-Test product is widely used in the field of aerospace, military, automotive components, optoelectronic, electronic parts, communication, furniture, building materials, chemicals, paint, inspection laboratory, research institutes and other high-tech industries.
 

We have powerful ability to design, develop and manufacture custom made products according to customer’s special applications, and will go on enlarge our products line, provide professional solutions, timely services and qualified products to feedback customers’ kind support and trust.
 

We are also looking forward extensively and deeply work with customers to create brilliant future together.