8 Pins Ethernet Lan Transformer ST7033QNL For High Performance Digital Switches

11.56mm x 6.99mm Ethernet Lan Transformer ST7033QNL For High-performance digital switches

Ethernet Lan Transformer:

Network transformers are also known as network isolation transformers, Ethernet transformers, and network filters.

Product types are divided into single-port, dual-port, multi-port, 10/100BASE, 1000BASE-TX, and RJ45 interface integrated network isolation transformers.

Products are mainly used: RJ45 network card, Ethernet switches, network routers, ADSL, VDSL digital devices, EOC terminals, EPON/GPON triple-play devices, network set-top boxes, smart TVs, network cameras, SDH/ATMSDH/ATM, PC motherboards, Industrial motherboards and other equipment.

Effect:

Theoretically speaking, it is not necessary to connect a transformer and it is also able to work normally when it is connected to RJ45. However, the transmission distance is very limited, and it will also have an impact when it is connected to a different network Port. And the external interference to the chip is also great. When connected to a network transformer, it is mainly used for signal level coupling. Can have the following effects:

• The signal can be enhanced to make its transmission distance farther;
• Isolating the chip end from the outside, the anti-interference ability is greatly enhanced, and the chip is very protected (such as lightning);
• When receiving the network ports of different levels (such as some PHY chip is 2.5V, some PHY chip is 3.3V), it will not affect each other's equipment.

11.56mm x 6.99mm Ethernet Lan Transformer ST7033QNL For High-performance digital switches

Dimensions: