ID mounted Electric Tube Beveling Pipe End Beveling Machine And Pipe Facing Tool Portable

ID mounted Electric Tube Beveling Pipe End Beveling Machine And Pipe Facing Tool

Product Introduction

The portable pipe beveling machines for mechanical pipe edge preparation and orbital welding makes the job easy to be done on-site or in the workshop.

Features

• Cold cutting, without influence the material of the pipe
• ID mounted, adopt T structure
• Varity of beveling shape: U, Single-V, double-V,J beveling
• It can also be used for repairing inner wall and deep hole processing.
• Working range:12.5-240mm
• Driven motor: Pneumatic and Electric
• Customized machine is acceptable

Technical Parameters

*Electric: Rated voltage of 220V, 50/60Hz

Installation & Processing

■ During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.

During installation, the tools should not touch the feed spindle and the expansion block.

■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.

■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.

Product series

*Electric: Rated voltage of 220V, 50/60Hz

Information and Feedback

Maintenance Information: Before the machine or any of its accessories is returned for maintenance, please call Bohyar Company. We will give suggestions on transportation and handover of the machine or accessories, and estimate the time and cost of corresponding maintenance.

Feedback: To constantly improve the satisfaction of users with the product quality and service, we will appreciate if you contact us to present any better operation or service methods of the equipment or any suggestion on the optimization of any technical data. We will consider and undertake to validate your precious suggestions, so as to modify or update the product and operation manual for improvement.

General Instruction

Bohyar, headquartered in Suzhou City, Jiangsu Province, always endeavors to provide customers with a full set of solutions for industrial pipeline. After many years of research and development, Bohyar has produced a full range of online pipeline cutting and beveling equipment, hydraulic power station, flange facer etc., which is flexible to meet different needs of customers around the world. We devote our efforts to serve for many fields such as global nuclear power plant, oceaneering, pressure vessel, long distance pipeline and chemical plant. What’s more, we are improving our products continuously by exploring the practical usage of the site, which allows our team to create high-quality products and service.