continuous anneal tin plating machine

Brand Name:E&V

Model Number:40H

Place of Origin:China

...Continuous Annealing Tin Coating Machine 300 M/Min continuous annealing tin coating machine 1. model: PL-40H 2. no. of wire: 40 3. max speed :300m/min 4. wire dia: annealing length 5m : 0.1-0.32mm annealing length 6m : 0.1-0.40mm annealing length 6. 5m : 0.1-0.65mm annealing length 9.0m : 0.35-1.0mm 5. pay off stand : by tension wire / ober head 6. pay off bobbin size: 300mm/max 7. annealing method :tube annealing 8. tin...

Brand Name:Wiremac

Model Number:QDX60A18

Place of Origin:China

...Tinning Machine Annealing Tin Plating Equipment Introduction Tinning equipment operation steps and methods A. Open the control cabinet, close the main power supply and close the door of the control cabinet. B. Place the "upper annealing section", "lower annealing section" and "oven" knobs on the "on" position; When tinning is required, set the "tin...

Brand Name:RPS-SONIC

Model Number:RPS-TX201000

Place of Origin:China

... is a process in which a metal coating is deposited onto a conductive object to enhance its appearance, provide corrosion resistance, or improve other properties. In the case of ultrasonic tin plating,

Brand Name:SUNTECH

Model Number:DDX

Place of Origin:CHINA

Tin Plating Machine Tin Plating Line 1.Technological process of production pay off→electrolytic degreasing→water rinsing→pickling→water rinsing→tin plating→water rinsing→neutralization→water rinsing→drying→take up 2.Main process ...

Brand Name:HQS

Model Number:0.15-0.49mm

Place of Origin:Taizhou,China

Tinplate, also known as tin-coated steel or tin-plated steel, is a type of thin steel sheet that has been coated with a thin layer of tin on both sides. It is widely used in various industries due to its desirable properties and versatility. The steel used...

Brand Name:ROYAL

Model Number:RTAC1000

Place of Origin:Made in China

... more reliably and for a longer life time, 2-3 times longer than without coating in general. Cutting Tools: ( Suggested Coatings: AlTiN/TiAlN, TiCN and TiN) Sawing, milling, CNC insert ( hard turning using),

Brand Name:Quickmachine

Model Number:Custom

Place of Origin:China

Machined Plastic Parts, machined internet devices, wireless housings, plastic holders, plastic injection, molded parts We are committed to offer our clients a wide array of Micro Machined Parts. These Micro Machined Parts are precision engineered by the ...

Place of Origin:Jiangsu, China (Mainland)

Brand Name:Newlead

Model Number:16H

... 300 send-out method hairbrush wire placing annealing method tubular annealing mode if wire receiving torque motor 1.2-1.5N.M torque mot or 0.3-0.7N.m mode of tin-plating single-furnace hot dip(trans verse plating) mould tin-scraping single tinning ove n

Brand Name:Senyilu

Place of Origin:China

... cleaning and annealing, leveling, trimming, and then cleaning, electroplating, reflow, passivation, and oiling. Cut into finished products of tin-plated sheet, and the tin used for tin-plated sheet is high-purity tin (Sn>99.8%). The tin layer can

Brand Name:QUANJIANG

... for making food cans, beverage cans, paint cans, and chemical cans. It provides features of rust resistance, alkali resistance, and sulfur blackening resistance. With the box annealing (BA) and continuous annealing (CA) processes, ETP can be produced in

Brand Name:Decho

Model Number:Electrolytic Tinplate Coil

Place of Origin:CHINA

...Continuous annealing) and BA Tin-plated thin steel plate and steel strip, also known as tinplate, this steel plate (strip) surface plated with tin, has good corrosion resistance, and non-toxic, can be used as packaging materials for cans, cable inside and outside the skin, instrumentation and telecommunication parts, torches and other small hardware. Tin-plated

Brand Name:FUCHUAN

Model Number:FC-T42/630

Place of Origin:CHINA

Customized Fine Wire Drawing Machine With Continuous Annealing φ0.41～φ0.64mm Fine Wire Drawing Machine With Continuous Annealing Description: The annealer, oven and tinning furnace is tube type. Easy to replace and maintenance. The two ends of the furnace ...

Brand Name:Baogang

Model Number:Tinplate

Place of Origin:China

.... Tinplate is a low carbon steel rolled into a steel plate with a thickness of about 2mm, after pickling, cold rolling, electrolytic cleaning and annealing, leveling, trimming, and then cleaning, electroplating, reflow, passivation, and oiling. Cut into

Brand Name:Herrman

Model Number:HM250-17, HM250-11, HM250-9

Place of Origin:China

...Machine Copper Intermediate Drawing Machine With Continuous Annealing Wire Cable Machine Copper Intermediate Drawing Machine With Continuous Annealing 1. Introduction The machine is mainly used to draw Φ2.5~Φ3.5mm copper wire to Φ0.4~Φ1.6mm copper wire then continuous annealing...

Brand Name:BaoGang

Model Number:SPTE SPCC

Place of Origin:China

.... Tinplate is a low carbon steel rolled into a steel plate with a thickness of about 2mm, after pickling, cold rolling, electrolytic cleaning and annealing, leveling, trimming, and then cleaning, electroplating, reflow, passivation, and oiling. Cut into

Brand Name:ZGMC

Model Number:DX51D SGCC SGCD SGCE DX52D

Place of Origin:Shandong China

Thickness 0.14 - 0.50mm Width 600 - 1050mm Length As per customer requirement Steel Type MR, SPCC Annealing BA (Batch Annealed), CA (Continuously Annealed) Standard EN10202, JIS G3303, ASTM A623/ A624/ A625/ A626 Temper T1, T2, T2.5, T3, T3.5, T4, T5, DR7...

Brand Name:SYL

Model Number:tinplate

Place of Origin:CHINA

... over the past decades. Improvements of the steel production processes (lower melting residuals and better inclusion cleanliness, switch from ingots to continuous casting, good temperature controls during hot rolling, high precision cold rolling).

Brand Name:HOOHA

Model Number:HOOHA-drawing

Place of Origin:China

Small copper wire fine wire Continuous Annealing Wire Drawing Machine Drawing machine specifications wire drawing machine with annealing Model 17DHT SMD205T 24DHT control system digital readout button power control dual inverter wire inlet diameter 0....

Brand Name:HOOHA

Model Number:24DHT/VG150

Place of Origin:Guangdong

Fine Copper Wire Continuous Annealing,Wire Drawing Machine Drawing machine specifications wire drawing machine with annealing Model 17DHT SMD205T 24DHT control system digital readout button power control dual inverter wire inlet diameter 0.75-1.6mm 0.95-1....