Categories | Ultrasonic Welding Transducer |
---|---|
Brand Name: | RPS-Sonic |
Model Number: | RPS-T6015-4Z |
Place of Origin: | China |
MOQ: | 5 sets |
Price: | negotiation |
Payment Terms: | T/T, Western Union, MoneyGram |
Supply Ability: | 200 Sets/month |
Delivery Time: | 2days |
Packaging Details: | Foam+Carton |
Certification: | CE |
Frequency: | 15Khz |
Diameter: | 60mm |
Ceramic chips: | 4chips |
Power: | 2200W |
capacity: | 8000-10000 |
Resistance: | <20 Ω |
Ultrasonic welding of plastics is performed through vibrations which are presented perpendicularly to the joint. Heating is dependent on the loss modulus of the polymer, the frequency and amplitude of the ultrasonic vibrations.
Advantages:
Internal heat generation means that less material is heated so
there is a smaller heat affected zone and less chance for
deformation
Very quick cycle times, typically less than a second
Well-established process with quite sophisticated equipment
available and plenty of industry knowledge
Naming method:
T - Transducer
50 - The outside diameter for piezoceramic ring (mm)
20 - The frequency of the transducer
4 - The number for piezoceramic ring,
D - The type of transducer D means Chinese type,B-Branson type,Z-NTK type.
Power (W) | Frequency (khz) | Capacitor Range (pF) | Resistance | ||
Yellow ceramic | Gray ceramic | Black ceramic | |||
2200 | 14.70-17.90 | 8000-10000 | -- | -- | <20 Ω |
PARAMETER
Item No. | Connect screw (Size) | Capacitance | Input power (W) | Max. Amplitude (um) | ||
Yellow | Grey | Black | ||||
RPS-T7015-4Z | M20 X 1.5 | 12500-14000 | / | 17000-19000 | 2600 | 10 |
RPS-T6015-4Z | M20 X 1.5 or M16 X 1 | 8000-10000 | 10000-12000 | 12500-13500 | 2200 | 10 |
RPS-T6015-6Z | M20 X 1.5 | 14000-16000 | / | 19500-21000 | 2600 | 10 |
RPS-T5015-4Z | M18 X 1.5 | 12000-13000 | 13000-14300 | 15000-17000 | 1500 | 8 |
RPS-T4015-4Z | M16 X 1 | 10000-11000 | 10500-11500 | 700 | 8 | |
RPS-T7015-4D | M20 X 1.5 | 12500-14000 | / | 17000-19000 | 2600 | 11 |
RPS-T6015-4D | M18 X 1.5 | 9000-10000 | 10000-11000 | / | 2200 | 11 |
RPS-T6015-6D | 1/2-20UNF | 19000-20500 | / | 23000-25000 | 2600 | 11 |
RPS-T5015-6D | 1/2-20UNF | 17000-19000 | / | 23000-25000 | 2000 | 11 |
Description:
The transducer converts high-frequency electrical energy into high-frequency mechanical vibrations. And it contains several piezoelectric ceramic discs sandwiched under pressure between two metal blocks. Between each disc is a thin metal plate, which forms the electrode. When a sinusoidal electrical signal is fed to the transducer via the electrodes, the discs expand and contract, producing axial vibrations.
15Khz transducer widely used in high power welding&sealing system.Piezoelectric transducer is the electric charge that accumulates in certain solid materials in response to applied mechanical stress. It is key point of all ultrasonic equipment.The transducer decide the property of the machine.We can supply transducer, also transducer with house and booster.
1. The piezoelectric ceramic chip adopts imported parts, and can
give a strong and stable output.
2. High efficiency, high mechanical quality factor, obtaining high
electric-acoustic conversion efficiency work at the resonance
frequency points.
3. Large amplitude: optimization design by computer , vibration
speed ratio is high .
4. Large power,Under the action of prestressed screw, the energy of
the piezoelectric ceramic to get maximum play;
5. Good heat resistance, small harmonic impedance, low calorific
value, using temperature range is wide.